Automotive MCUs

Hi,I am trying to upload a code to my SPC570S-DISP development board, but I am having an issue with the debugging tool UDE. I searched for this issue in the forum and I have tried all the solutions given and none of it work. When I try to debug from SPC5Studio I get this error,And when I try to use the UDE STK tool I get this error,Message from component 'PpcJtagTargIntf' :Can't connect target !Message from component 'PpcJtagTargIntf' :No JTAG client found !Please check:- target power supply- JTAG cable connection- target configurationI have created a case with ST, and so far no one has been able to figure out what the problem is. As I saw from the posts in the forum, many users are having this problem. Please be kind enough to look into this matter.

Hallo everyone.I am evaluating this platform and I got it to work with the UDE STK debugger env.unfortunatley when I shutdown my laptop at the end of the day, it seems to loose all the driver settings.The morning after when I try to connect to the boar dit gives me this error message:Message from component 'PpcJtagTargIntf' :Can't connect target !Message from component 'PpcJtagTargIntf' :No JTAG client found !Please check:- target power supply- JTAG cable connection- target configurationI am on W10 Pro x64. I connect the eval board USB cable to the dock (but it has same behavior even if I use the laptop's own ports)The drivers for FTDI and PLS USB JTAG adapter are installed and configured in device manager settings:I don't like having to reinstall the UDE STK 5.0 every day...Has anyone faced the same problem? how did you fix it (if ever)?Thanks in advanceMaurizio

I'm using SPC_studio programer and debuging my aplication whit PLS UDE StarterKit. It's conected and program all.But i don't is possible debug? I'ts possible debug the SPC58EE84E7 with PLS UDE Starterkit? If is possible, could you sendme example software for conect in SPC58EE84E7 with GTM3?

..

I am new on SPC5 Series, so can anybody explain or show step by step how to blink a led by using SPC5 Studio?

I have downloaded PLS UDE STk free version from PLS website can you tell me the how to flash the program and debug in it .

Hello,How to add postbuild steps file like srecord ?Thanks for your attention,Best regards.

..

I'm trying to find low level driver for GTM peripher into SPC5 Studio.I've installed SPC5 studio version 5.8.1 and "SPC58xExx Support" 1.0.0.20200908161213 but I didn't find it.

I am trying to find maximum data rate supported by SPC582B60X, no data is given in datasheet is there any relation by which i can calculate data rate? and what will be the CAN controller clock speed?please suggest

tool:PLS USB/JTAGAdapter for spc5xxxxi plug pls usb/jtag to my pc(win10)​The usb driver will show connected jtag spc5xxx... for 3 second, and disconnet.i dont know what happen . Maybe, firmware is broken. could repair it?!

Hi, I'm new to the SPC5studio world.I'm following the help Topic "Install PLS UDE feature", and when I try to add the debug official site: http://spc5.drive.cloudforge.com/projects/spc5tools/updates , I get the following error:I think that's why I can't use the integrated function to debug (I can still use the standalone UDE Starterkit):Thank you in advance for any help,Olivier

Hello,a few weeks back, I downloaded UDE STK from pls-mc.com without any problems. Given the fact that I am facing a few problems with the debugger right now, I thought I might check for updates on the website. They have since changed the site quite a bit and I had to get an account in order to be able to access the "UDE Starter Kit Software" download category. Now that I have the account, I can see that this section is completely empty.So the problem is: I have an eval board and I can not download the current version of the STK for the Power Architecture - even though there is a license for the software on the eval board...Am I missing something here?

I have an SPI SD Card interface how can i log to my memory card using this module and Free RTOS+FATFS module .Please provide some examples program if possibles or other alternate solutions

Hello!I am desperately trying to get the PLS integration to work but it is failing in every regard. When trying to create a "Universal Debug Engine" Debug Configuration, I am greeted with this:I do have all recent updates applied in SPC5Studio.If I try to "Launch UDE Debugger on SPC5 Application":I am greeted with this:...no indication of any error, neither in Console nor in Problems view.

The actual situation is shown in Figure 1. I try to solve this problem in “Default Programs Editor�?，but I didn't find the “wsx�? file in Figure 2. Is there any way to solve it?

..

Hi,i can`t find scp58ec Reference manual(rm0407)https://www.st.com/content/st_com/en/products/automotive-microcontrollers/spc5-32-bit-automotive-mcus/spc5-g-general-purpose-mcus/spc58-c-line-mcus/spc58ec70e1.html#resourceHere is rm0004 but it is for spc560 and there is no information i`m looking for.Is it possible to get a programmer`s reference manual?​Best regards​*Actually, I want to know how to adjust the sample point and calculate the bit rate.​

..

Hi,I have SPC560b-DIS Discovery Board in my hand. I am trying to prepare the necessary working environment for this, but I have problems in the compiler part. Although I opened the Discovery card sample code on SPC5studio, the compiler settings are not displayed. What could be the reason for this?Can you help me set the compiler settings?

..

..

..

..

I try to install the SPC5-MCTK-LIB_RTM_1_1_0_web under SPC5Studio 5.8.1 according to the "Quick Start Guide Motor Control ToolKit for SPC5Studio". First I Updated the whole IDE and added the available components. Then I tried to install the MCTK-LIB.When I reach the Steps described at Page 14 (Add local Software), I see how the IDE tries to compute alternate solutions while clicking next, where I get the following Error:"Cannot complete the install because one or more required items could not be found. Software being installed: SPC56xx Web Motor Control Feature 1.0.0.201807231455 (com.st.spc5.components.spc5rla.spc56xx.webmotorcontrol.feature.feature.group 1.0.0.201807231455) Missing requirement: SPC56xx Web Motor Control Feature 1.0.0.201807231455 (com.st.spc5.components.spc5rla.spc56xx.webmotorcontrol.feature.feature.group 1.0.0.201807231455) requires 'com.st.spc5.components.spc5rla.spc5xx.full.feature.feature.group 1.5.0' but it could not be found"Is it possible to get the