Why am I getting VL53L0X Error: -6?

Is it possible that you did not call DataInit() prior to calling StaticInit()?

"VL53L0X_DataInit() function is called one time, and it performs the device initialization.

To be called once and only once after device is brought out of reset."

It sets a bunch of registers into a more optimal state before the chip gets going.

I've seen this error before, but the customer found his bug and did not tell me what he changed.

But you did a good job of showing me what you called, and I did not see DataInit().

• john

John,

Thanks for the prompt reply. I'm using the Adafruit library, and I believe all the setup code is in their begin() function, as follows:

/**************************************************************************/
boolean Adafruit_VL53L0X::begin(uint8_t i2c_addr, boolean debug, TwoWire *i2c) {
 uint32_t refSpadCount;
 uint8_t isApertureSpads;
 uint8_t VhvSettings;
 uint8_t PhaseCal;
 
//DEBUG!!
 Serial.print("In Adafruit_VL53L0X::begin(");
 Serial.print(i2c_addr,HEX); Serial.print(",");
 Serial.print(debug); Serial.print(",");
 Serial.print((uint16_t)i2c,HEX); Serial.println(")");
//DEBUG!!
 
 // Initialize Comms
 pMyDevice->I2cDevAddr = VL53L0X_I2C_ADDR; // default
 pMyDevice->comms_type = 1;
 pMyDevice->comms_speed_khz = 400;
 pMyDevice->i2c = i2c;
 
 pMyDevice->i2c->begin(); // VL53L0X_i2c_init();
 
//DEBUG!!
 //Serial.println("After pMyDevice->i2c->begin()");
//DEBUG!!
 
 // unclear if this is even needed:
 if (VL53L0X_IMPLEMENTATION_VER_MAJOR != VERSION_REQUIRED_MAJOR ||
 VL53L0X_IMPLEMENTATION_VER_MINOR != VERSION_REQUIRED_MINOR ||
 VL53L0X_IMPLEMENTATION_VER_SUB != VERSION_REQUIRED_BUILD) {
 if (debug) {
 Serial.println(F(
 "Found " STR(VL53L0X_IMPLEMENTATION_VER_MAJOR) "." STR(VL53L0X_IMPLEMENTATION_VER_MINOR) "." STR(
 VL53L0X_IMPLEMENTATION_VER_SUB) " rev " STR(VL53L0X_IMPLEMENTATION_VER_REVISION)));
 Serial.println(F("Requires " STR(VERSION_REQUIRED_MAJOR) "." STR(
 VERSION_REQUIRED_MINOR) "." STR(VERSION_REQUIRED_BUILD)));
 }
 
 Status = VL53L0X_ERROR_NOT_SUPPORTED;
 
 return false;
 }
 
 Status = VL53L0X_DataInit(&MyDevice); // Data initialization
 
 if (!setAddress(i2c_addr)) {
 return false;
 }
 
 Status = VL53L0X_GetDeviceInfo(&MyDevice, &DeviceInfo);
 
 if (Status == VL53L0X_ERROR_NONE) {
 if (debug) {
 Serial.println(F("VL53L0X Info:"));
 Serial.print(F("Device Name: "));
 Serial.print(DeviceInfo.Name);
 Serial.print(F(", Type: "));
 Serial.print(DeviceInfo.Type);
 Serial.print(F(", ID: "));
 Serial.println(DeviceInfo.ProductId);
 
 Serial.print(F("Rev Major: "));
 Serial.print(DeviceInfo.ProductRevisionMajor);
 Serial.print(F(", Minor: "));
 Serial.println(DeviceInfo.ProductRevisionMinor);
 }
 
 if ((DeviceInfo.ProductRevisionMajor != 1) ||
 (DeviceInfo.ProductRevisionMinor != 1)) {
 if (debug) {
 Serial.print(F("Error expected cut 1.1 but found "));
 Serial.print(DeviceInfo.ProductRevisionMajor);
 Serial.print(',');
 Serial.println(DeviceInfo.ProductRevisionMinor);
 }
 
 Status = VL53L0X_ERROR_NOT_SUPPORTED;
 }
 }
 
 if (Status == VL53L0X_ERROR_NONE) {
 if (debug) {
 Serial.println(F("VL53L0X: StaticInit"));
 }
 
 Status = VL53L0X_StaticInit(pMyDevice); // Device Initialization
 }
 
 if (Status == VL53L0X_ERROR_NONE) {
 if (debug) {
 Serial.println(F("VL53L0X: PerformRefSpadManagement"));
 }
 
 Status = VL53L0X_PerformRefSpadManagement(
 pMyDevice, &refSpadCount, &isApertureSpads); // Device Initialization
 
 if (debug) {
 Serial.print(F("refSpadCount = "));
 Serial.print(refSpadCount);
 Serial.print(F(", isApertureSpads = "));
 Serial.println(isApertureSpads);
 Serial.print(F("Status = ")); Serial.println(Status);
 }
 }
 
 if (Status == VL53L0X_ERROR_NONE) {
 if (debug) {
 Serial.println(F("VL53L0X: PerformRefCalibration"));
 }
 
 Status = VL53L0X_PerformRefCalibration(pMyDevice, &VhvSettings,
 &PhaseCal); // Device Initialization
 }
 
 if (Status == VL53L0X_ERROR_NONE) {
 // no need to do this when we use VL53L0X_PerformSingleRangingMeasurement
 if (debug) {
 Serial.println(F("VL53L0X: SetDeviceMode"));
 }
 
 Status = VL53L0X_SetDeviceMode(
 pMyDevice,
 VL53L0X_DEVICEMODE_SINGLE_RANGING); // Setup in single ranging mode
 }
 
 // Enable/Disable Sigma and Signal check
 if (Status == VL53L0X_ERROR_NONE) {
 Status = VL53L0X_SetLimitCheckEnable(
 pMyDevice, VL53L0X_CHECKENABLE_SIGMA_FINAL_RANGE, 1);
 }
 
 if (Status == VL53L0X_ERROR_NONE) {
 Status = VL53L0X_SetLimitCheckEnable(
 pMyDevice, VL53L0X_CHECKENABLE_SIGNAL_RATE_FINAL_RANGE, 1);
 }
 
 if (Status == VL53L0X_ERROR_NONE) {
 Status = VL53L0X_SetLimitCheckEnable(
 pMyDevice, VL53L0X_CHECKENABLE_RANGE_IGNORE_THRESHOLD, 1);
 }
 
 if (Status == VL53L0X_ERROR_NONE) {
 Status = VL53L0X_SetLimitCheckValue(
 pMyDevice, VL53L0X_CHECKENABLE_RANGE_IGNORE_THRESHOLD,
 (FixPoint1616_t)(1.5 * 0.023 * 65536));
 }
 
 if (Status == VL53L0X_ERROR_NONE) {
 return true;
 } else {
 if (debug) {
 Serial.print(F("VL53L0X Error: "));
 Serial.println(Status);
 }
 
 return false;
 }
}