Is it possible to drive peripheral devices with octospi?

In my design, I want to drive  a dac with octospi.

I need to transmit data via the interface in DAC data frame without any instruction and address.

like：

 *(__IO uint8_t*)&OCTOSPI1->DR = data[i];

void OCTOSPI1_Init(void)
{
 OCTOSPI1->CR &= ~OCTOSPI_CR_EN;
 while ((OCTOSPI1->CR & OCTOSPI_CR_EN) != 0);

 OCTOSPI1->DCR1 = (0 << OCTOSPI_DCR1_CSHT_Pos) | (2 << OCTOSPI_DCR1_DEVSIZE_Pos);

 OCTOSPI1->CCR = (0b11 << OCTOSPI_CCR_DMODE_Pos); // Data on 4 lines

 OCTOSPI1->DCR2 = 3;		// prescaler = 4

 OCTOSPI1->DLR = 2; 		// 2

 OCTOSPI1->CR |= OCTOSPI_CR_EN;

 MODIFY_REG(OCTOSPI1->CR, OCTOSPI_CR_FMODE, 0x00000000);
}

void OCTOSPI1_WriteData(uint8_t* data, uint32_t length)
{
 for (uint32_t i = 0; i < length; i++) {
 while (!(OCTOSPI1->SR & OCTOSPI_SR_FTF)); // wait for FIFO available
 *(__IO uint8_t*)&OCTOSPI1->DR = data[i];
 }

 // wait for transmission completion
 while (!(OCTOSPI1->SR & OCTOSPI_SR_TCF));
 OCTOSPI1->FCR |= OCTOSPI_FCR_CTCF; // clear transmission completion flag
}

The operation above will block the mcu totally.

Is it possible to do that by octospi and how to configure?