Edge AI

The information I find on the community and wiki* refers to old versions of X-Cube and files that have been generated in my case do not appear in the examples, so I have not been able to create the network and run it to obtain predictions. Where can I find an updated example to guide me?Ide: 1.8.0X-Cube-AI: 7.1.0*https://wiki.st.com/stm32mcu/wiki/AI:How_to_perform_motion_sensing_on_STM32L4_IoTnode#Create_an_STM32Cube-AI_application_using_X-CUBE-AI

I want to try and get more information about x-cube-ai. I have prepared the neural network and I want to run it on STM Nucleo board (nucleo L476RG) but unfortunately I have an error during building the project in STMCubeIDE.I got this error:Could someone can explain me what is wrong with that?I have attached the project files and neural network file.

It seams that I have some troubles using a NanoEdgeAI library on an STEVAL-STWINKT1A. I got BOARD ERROR for all the NanoEdgeAI functions. Any idea? Thank you

https://www.st.com/content/st_com/en/campaigns/nanoedgeaistudio.html Part4 - Development Boards: Which development boards are supported by NanoEdge AI? > For the Trial version: all STM32 demo boards listed in the Studio (not the generic ones) (see doc) For the Paid version: all STM32 dev boards  What was the hardware used in the webinar? > STEVAL STWINKT1B :

https://www.st.com/content/st_com/en/campaigns/nanoedgeaistudio.html Part2 - NanoEdge AI Studio: Hi, can the model be saved locally to allow power failure on the sensing device and restart with known model? > Dynamic model knowledge (Anomaly Detection) is allocated in RAM and it is possible to backup the model in the non-volatile memory as: EEPROM, Flash, etc. Please see:

https://www.st.com/content/st_com/en/campaigns/nanoedgeaistudio.html Part3 - NanoEdge AI Studio: Can NanoEdge AI undertake dynamic learning? for example swerve detection in a vehicle travelling over a random selection of road surfaces and weather? > Yes, it is possible for Anomaly Detection use case, please see:

About the function "validate on target", I don't understand what X-cross is.And when I clicked this button , I saw the X-cross accuracy is n.a., I don't know what this means and how to solve. Can you give me some suggestions?

I tried to compress a keras model. It is a versy simple Neural network model with just fully connected (dense) layers. I converted it to tflite and compressed the weight to tf.float16 which was originally tf.float32. When I upload the model, it gave me error Neural Network Tools for STM32AI v1.6.0 (STM.ai v7.1.0-RC3) INTERNAL ERROR: 'FLOAT16'Is it that STM doesnot support float16 formats ?More Info: Its a tflite model and I used STM32Cube.AI.runtime

https://www.st.com/content/st_com/en/campaigns/nanoedgeaistudio.html Part5 - NanoEdge AI licensing: Is NanoEdge AI Studio free? or do I need a license? > The full version of the Nanoedge AI Studio is not free and there is also a trial version of up to 6 months for limited supported Boards. 

https://www.st.com/content/st_com/en/campaigns/nanoedgeaistudio.html Part1 - NanoEdge AI Studio: What input formats does NanoEdge AI support for data sets for the classification use case? > NEAI Studio supports:   File (.txt / .csv), Serial Port (USB VCP) of datalogger, SD card of datalogger (.dat) Please see:

hello,i have a keras model generated on google colab, i have test on google colab and it works fine, i wanted to export it on cubemx and when i start teh validation on desktop process i'am having an accurancy that is n.a here is the output of my cubemx c_id  m_id  desc           output                   ms          %  --------------------------------------------------------------------------  0     0     Dense (0x104)  (1,1,1,1)/float32/4B          0.004   10.6%  1     1     Dense (0x104) 

..

..

Using X-CUBE-AI 6.0.0, trying to import a tflite model of a RNN network, with both dense and LSTM layers, this error is returned. I can't find any information on that. Is there something that can be done?Thank you very much

As the title states is the Tensorflow 2.7 support by X-Cube-AI?If not when is it going to and is there a workaround for implementing the 2.7's functionalities on previous versions?

..

Dear support-team,I've encountered quite some problems when loading a pre-trained Pytorch mobilenetv2 model in Xcube-AI. I have tried the following with the app stm32ai located in the installation repository of X-Cube-AI/7.0.0. torch fp32 --> onnx_fp32 --> onnx_int8 (external)torch fp32 --> onnx fp32 --> keras (h5) fp32converted keras (h5) fp32 --> tflite_fp32I found that:quantized onnx model cannot be ported and analyzed directly in Xcube-AI. The quantization tool is only aimed at keras model. Does it mean that we cannot use quantized int8 ONNX model on STM32 platform? since only channel-last (NHWC) model is supported in STM32 MCU, the torch model has to be converted from NCHW to NHWC. But the Transposition operator does not seem to supported in Xcube-AI. If that is case, how would you recommend to port pytorch to STM32 platform? Should we use directly the tor

I've followed the example on Embedded Inference Client API. However when I run the model I get the error code 23 and type 19 which is the AI_ERROR_CODE_INVALID_FORMAT.I've checked the type with the following code and both the input and output return 1 for float_stat, this shows that it is a float type /* Extract format of the first input tensor (index 0) */ volatile const ai_buffer *ai_input_1 = &ai_input[0]; /* Extract format of the tensor */ fmt_1 = AI_BUFFER_FORMAT(ai_input_1); //Extract the float value 1 = float type float_stat = AI_BUFFER_FMT_GET_FLOAT(fmt_1);I've included my code to see if there is something obvious. I have used the API reference that is accessed through CubeIDE but I have found no help. I'm unsure of any other documentation that may help either or examples. I've removed the default code to make it easier to read.An Onnx model was used w

I've been working with the Cube AI package recently and I think it is amazing and has got soo much potential. I find for most ML it is done on a computer or cloud but STM has given us another approach that I think will work very well. My issue with Cube AI is that all videos online are >1 year old and use older versions. As well non-show how to use Onnx format ML models as examples just use TensorFlow lite. As well I've really struggled to find good documentation and examples for Cube AI, and the examples in the repository are OK but don't work and I feel like need more explanation.Will there be more videos, documents coming in the future?Are there any documents, websites or videos I should watch to help me as I may have missed them?Thanks to anyone who directs me in the right direction :)

Hi,When I try to load the Validation Template from de .ioc inside the IDE or from CubeMX the software gets stuck.A small window which says "Please wait, configuring [...]" appears and dissapears. After some minutes, an out of memory error occurs.The Core loads without problems and network analysis and validation on desktop or target also work fine.I'm using STM32CubeIDE 1.7 and X-CUBE-AI 7.1.0.Project is for STM32479I-EVAL board.

Hi,I am using Stm32cubeide for creating a tinyml project for sinewave-tensorflow example. For this I used xubeAI software manager and loaded my tflite file with stm32Ai runtime.In the main file I am facing issue when I run the following initialisationai_buffer ai_input[​AI_NETWORK_IN_NUM] = AI_NETWORK_IN; while building the project I get error saying invalid identifier.

I am using the STM32L476RG with its respective NUCLEO board. I want to experiment with object detection and edge ML on this device so I am using STMCube AI package. I want to use the efficientdet/lite0/detection quantization-trained model but when I import this into STM32CubeMX and attempt to analyze with the TF Micro Runtime, I get this error message:[AI:efficientdet] input->type == kTfLiteFloat32 || input->type == kTfLiteInt16 || input->type == kTfLiteInt8 was not true. [AI:efficientdet] Node QUANTIZE (number 0f) failed to prepare with status 1 [AI:efficientdet] Analyze fail on the AI modelAdditionally, when analyzing with the STM32Cube AI runtime, I get this error:INTERNAL ERROR: 'TFLite_Detection_PostProcess'The beginning quantize node transforms 2D image of uint8 into an int8 type. It says in the documentation of my version of Cube AI (7.0.0) that it supports TFLite

Hi,I've made a custom board where I followed the schematics of the STM32H747I-DISCO board. Instead of the stm32h747 I use the stm32h743 microcontroller, because of the availability. I'm working on the 'FoodReco' project and modified it to my needs (changed the pinouts for the SDRAM/DCMI etc). When I cover the camera with my finger, the camera frame buffer on my custom PCB looks really similar as the camera frame buffer on the disco board:For the DISCO board:

Hi, I have installed STM32 cube IDE and the latest version of CUBE AI software pack to convert a pretrained neural nework implemented and trained with Keras/TF. After creating a project, when I try to add a network from a saved model.h5 from the file system, when I try to analyze it I have the following error:Analyzing model C:/Users/<username>/STM32Cube/Repository/Packs/STMicroelectronics/X-CUBE-AI/6.0.0/Utilities/windows/stm32ai analyze --name network -m C:/Users/<username>/facedetection/pnet.h5 --type keras --compression 1 --verbosity 1 --workspace C:\Users\<username>\AppData\Local\Temp\mxAI_workspace85208706500011701743944848630527 --output C:\Users\<username>\.stm32cubemx  [456] Failed to execute script stm32ai Traceback (most recent call last):&n

I'm trying to build a .npz file with multiple input and output data.I achieved to add just one input and output using this code:np.savez('STM32TestData.npz', m_inputs_1=input_1, m_outputs_1=output_1, )   This works fine, but just one pair of data.Adding more keys as 'm_inputs_2', 'm_outputs_2' didn't worked.np.savez('STM32TestData.npz', m_inputs_1=input_1, m_outputs_1=output_1, m_inputs_2=input_2, m_outputs_2=output_2, )     E204(ValParamError): number of input arrays is invalid, 2 instead 1Also I tried to save data as dictionaries with keys 'm_inputs_idx', 'm_outputs_idx' with 'idx' from 1 to N, but the same error occurred.np.savez('STM32TestData.npz', **inputs_dict, **outputs_dict)   E204(ValParamError): number of input arrays is invalid, 439 instead 1What is the c