STM32 MCUs TouchGFX and GUI

Hello I see on this link that Touch Gfx can only use a single layer from the LTDC.https://support.touchgfx.com/docs/development/touchgfx-hal-development/scenarios/scenarios-ltdc-parallel-rgb Is there some way of using the two LTDC's layers ?,May be is there a Topuch Gfx licensed version (not for free, paying license) which indeed can make use of the two layers ? Regards  

I build a LCD driver board with STM32H750ZBT6  ,then i want to use built-in LTDC driver and SDRAM to run 480*270*16 TFT LCD panel , but touchGFX list following wrong message, where reason from ?        Generate CodeGenerateDoneGenerate Assetsmake -f simulator/gcc/Makefile assets -j80 [main] us 0 init_cheap: VirtualAlloc pointer is null, Win32 error 487AllocationBase 0x0, BaseAddress 0x60EA0000, RegionSize 0x310000, State 0x10000D:\TouchGFX\4.25.0\env\MinGW\msys\1.0\bin\sh.exe: *** Couldn't reserve space for cygwin's heap, Win32 error 0simulator/gcc/Makefile:32: recipe for target 'assets' failedmake: *** [assets] Error 1FailedFailed

This is just a friendly PSA/warning to others who may be using this code: do not name any global/extern variable instances "context" if you use hardware-accelerated vector rendering.  If you do, you'll probably run into strange hard faults or data corruption issues.The function `stencil_buffer_set_prealloc()` writes four bytes to the global symbol with name "context", and thanks to how library linkage works there are no errors or warnings about this collision with their intended "context" variable.  The library function writes the value 0x202CCC5C in my code, and from the value (and behavior when I mess with it) this looks like a pointer to some memory in RAM.  This appears to be related to vector font rendering (or possibly all vector rendering).See 

I’m working on an STM32 project using TouchGFX and STM32CubeIDE. The code compiles fine on the real target, but when I try to build the TouchGFX Simulator, I get the following error repeatedly: fatal error: i2c_data.h: No such file or directory The i2c_data.h file is present in my project under Core/Inc. It seems the simulator build does not include the folder containing i2c_data.h in its include paths.

Hi.We have an application with a touch screen and 4 physical buttons. We have designed a demonstration GIU in TouchGFX, but to allow the simulator to handle presses on the hardware buttons, we have added the hardware buttons on the display. Consequently the display is made 100 pixels higher to have room for the buttons. It works fine for the simulator, but we cannot use the GUI design as it is for building the target application.I expected that it was possible to setup the simulator to hold the hardware buttons as an addition the the application display. But apparently not. It would be nice if it was possible to design the hardware button arrangement in addition the the GUI. The buttons should of cause have a legend and the button ID in addition to the arrangement. And of cause this should not be included in the target build. But it would be nice if it could hold additional fields (e.g. text areas and radio buttons) for simulating the rest of the hardware

I'm having a Model that receives data from the backend. I need that, according to the data received, independently of what view you're in, the presenter of the view executes a function that goes to a specific view. For instance, I'm receiving 1 in the Model, weathever the view I'm in, there will be a function in the Presenter that recieves the 1 and knows that it has to change view to the appropriate one. My function that maps the input to the view I've to change to is always the same, so I'm trying to avoid copying the whole logic in every presenter and just implement a single function that calls the bigger function that manages the logic. The idea is to create a singleton class in the common folder and use it. I was just wondering if this behavior could be achieved in some way with FrontendApplication.cpp

Hello Peeps!The ProblemI'm coming to you today with a burning question about the general workflow and best Plan of Approach when it comes to integrating TouchGFX and Ethernet (with LWIP). I've seen more posts about this subject, but none talk about the best way to go about it — instead focusing on the embedded software itself.What I've DoneUsing Berlinger's example projects and his explanation on setting up Ethernet on the H74x boards, I've managed to get Ethernet working. Or at least, the device is pingable — I haven’t touched SSL yet.I've also successfully generated a working TouchGFX project and imported it into STM32CubeIDE, after which I was able to add custom button functionality.Now comes the real challenge: combining the two of them...

I created a new screen and added a Scroll List. Initially setting the number of items to 9 and generating.Trying understand a separate behaviour, I later changed the number of items in the scroll list in Designer to 12 and the sim crashes.  It seems that the screenbase.hpp header shows the original declaration: touchgfx::DrawableListItems<ListMenuItem, 9> scrollList1ListItems;but the screenbase.cpp correctly sets the updated number of 12: scrollList1.setNumberOfItems(12);

We can control the overshoot percentage of a scroll list which seems to limit how much a "pull down" is allowed and animated above the top of the list.Is there a similar thing for the bottom of the list?a way to keep the list from being scrolled past the bottom of it as it's happening in the below image? (the list contains 9 elements in total.   

Hello,I’m currently working with an X-NUCLEO-GFX02Z1(ST7789V2) LCD using an 8080 parallel interface on a custom board. The LCD generally works well, but I’ve encountered some issues when the LCD fails to initialize correctly during power-on, or when it seems to reset or hang during operation (e.g., due to power glitches or signal noise). In these cases, the screen displays a corrupted image, stays blank, or becomes unresponsive.Is there a reliable way to detect whether the ST7789V2 has been reset or failed during runtime?What is the best practice to recover the LCD from this state automatically?I appreciate any suggestions, example code, or your experience in dealing with similar issues.Thanks in advance!

Hello, I have found some "typos" in TouchGFX while trying to generate code with STM32CubeMX on Linux (so with case sensitive file system). The result is that parts of the generated files "app_azure_rtos.c" and "app_azure_rtos_config.h" are missing. The missing part are the ones allocating and initializing threads for the TouchGFX application, using threadx. The root cause seems to be that the generator is including files like "RTOS_pool_create_X-CUBE-TOUCHGFX.tmp", but the actually generated file name is "RTOS_pool_create_X-CUBE-TouchGFX.tmp". It works on Windows but on Linux the file is not found and so the section contained in that tmp file is missing in the resulting code. A fix I just tested locally is to rename the tmp files which are not found to match the real pack name, which is "X-CUBE-TOUCHGFX", with all capital letters. So based on the zip file available here :

We are facing a technical issue creating a TouchGFX project. We suspect it is an inherent issue with ST’s toolchain —STM32CubeMX and TouchGFX—when used with the official STM32H757 Eval Kit.Issue at Quick Glance:1. Enabling LTDC in STM32CubeMX automatically enables DSI, even when we intend to use only RGB888 via CN20 (as in our custom display board with 10.1inch Winstar WF101JTYAHLNB0#).2. This causes build failures and prevents TouchGFX Designer from generating any GUI code, despite the project being valid and configured as per ST training examples.3. We’ve attempted all known workarounds, including patching headers and ensuring paths/configs are correct—yet the issue persists.We kindly request:1. Resolution on how to disable DSI cleanly while keeping CubeMX and TouchGFX code generation functional.2. Clarification on internal tool dependencies between LTDC and DSI, and how to bypass the

Hi Everyone,I am trying to plot the custom graph using randomly generated float values with up to 5 or 6 digits precision. Basically, I want to plot the graph for micro level data. For ex: my random float data is 0.19XXXX and my observations are like, if my 3rd digit is >= 5 then it is showing logic HIGH on the graph and if it is <5 then it is showing as logic LOW irrespective of 4th, 5th and 6th digit data. That means, if data is 0.192789 -> Low on the graph and 0.195123 -> High on the graph. Please let me know if any additional details are required. Thanks for your support.  

Hello,I've just started working with TouchGFX and I would like to know if there is a possibility of showing an image (for example a .bmp) given the starting memory address where this asset is stored in the internal flash memory.The idea is to have a custom image stored in a specific location that the customer can edit from the bootloader when switching on the machine (let's say the new customized image will take the place iin the flash memory of the old standard one). Is it possible to do something like that? Can anybody give me some advice? The microcontroller is quite limited in both flash and RAM (STM32G0B0RET6)Thank you!M.

I made a test project for h7s7 using cubeIDE,the structure generated is below:Then I opened touchgfx designer and import a blank UI, when I tried to build the project, a error came out:Generate CodeGenerateWrote generated/gui_generated/include/gui_generated/screen1_screen/Screen1ViewBase.hppWrote generated/gui_generated/src/screen1_screen/Screen1ViewBase.cppDoneGenerate Assetsmake -f simulator/gcc/Makefile assets -j8Reading ./application.configReading ./target.configDonePost Generatetouchgfx update_project --project-file=simulator/msvs/Applicatio

Hello. I've been trying to implement FreeRTOS and TouchGFX into my STM32G071RB + GFX01M2 application (eventually I'd like to use G0B1RE for extra RAM). I've followed the link: https://support.touchgfx.com/docs/development/touchgfx-hal-development/scenarios/scenarios-configure-rtosbut am experiencing issues trying to get my code to work. The main issue I'm dealing with is the code fails to initialize execute MX_TouchGFX_Init(). After some digging around, I noticed that the code hangs in HAL_delay(100), line 284 of MB1642DisplayDriver.c. Further digging, I found that the external interrupt of the DISPLAY_TEARING_EFFECT_Pin is triggered, which results in the calling of some RTOS functions before the kernel has even started. I noticed that this only happens after Display_DCS_Send_With_Data(DCS_

HelloI have a lot of assets, both images and texts, that I need to use across multiple projects. Is it possible to link to the assets without creating a local copy in the project?When I add an image in the designer it copies from the original location to the project assets\images folder. Can I not just set a relative link from the project folder to the folder that holds the assets? Thank you in advance.

Hello,MX_TouchGFX_PreOsInit() fails at the line below and connection to the debugger is lost in my project. Please see the screen below for the issue. The .ioc file is also attached. What's wrong with it? It is a custom board and working from RAM in FSBL. Is there any example project for TouchGFX with N6?  

Problem: when i call the function "MX_TouchGFX_Process();" the screen becomes unstable. After using this function, the image becomes and remains stable. (1)What can be the issue?How can i update the screen during blanking period, when the LTDC is not fetching? AN4861 cites the following on page 37(see pictures below): To update the screen during blanking period, I'have tried the following code, but doesn't work, the RRIF flag doesn't set(RRIEN is enabled), sometimes it only sets one time, when calling the function for a second time, (2)does someone have a better code or correction of my code? I c

Hello,I am working with stm32 h757 riverdi kit. I get this error in stm32cubeidearm-none-eabi-g++ -o "Riverdi_70STM32H7_CM7.elf" @"objects.list" -l:libtouchgfx-float-abi-hard.a -mcpu=cortex-m7 -T"C:\TouchGFXProjects\AKUSTEK_V3\STM32CubeIDE\CM7\STM32H747XIHX_FLASH.ld" --specs=nosys.specs -Wl,-Map="Riverdi_70STM32H7_CM7.map" -Wl,--gc-sections -static -L../../../CM7/Middlewares/ST/touchgfx/lib/core/cortex_m7/gcc --specs=nano.specs -mfpu=fpv5-d16 -mfloat-abi=hard -mthumb -Wl,--start-group -lc -lm -lstdc++ -lsupc++ -Wl,--end-group C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/bin/ld.exe: Riverdi_70STM32H7_CM7.elf section `.text' will not fit in region `FLASH' C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1

#include "cmsis_os.h" #include <stdio.h> #include <stdlib.h> #include "main.h" #include <stdbool.h> extern I2C_HandleTypeDef hi2c4; uint8_t DATA, DEVICE_STATUS = 0x00, XH, XL, YH, YL; uint16_t X_AXIS, Y_AXIS; #define DEVICE_ADDRESS (0x38 << 1) // Shifted for STM32 HAL uint16_t x_axis = 0, y_axis = 0; uint8_t STATUS = 0; void STM32TouchController::init() { // Initialization if needed (e.g., configure GPIO, I2C, etc.) } bool STM32TouchController::sampleTouch(int32_t& x, int32_t& y) { static uint16_t prev_x = 0xFFFF, prev_y = 0xFFFF; STATUS = HAL_GPIO_ReadPin(GPIOG, GPIO_PIN_2); // Touch INT pin low = active if (STATUS == GPIO_PIN_RESET) { // Read X high & low HAL_I2C_Mem_Read(&hi2c4, DEVICE_ADDRESS, 0x03, I2C_MEMADD_SIZE_8BIT, &XH, 1, 100); HAL_I2C_Mem_Read(&hi2c4, DEVICE_ADDRESS, 0x04, I2C_MEMADD_SIZE_8BIT, &XL, 1, 100); // Read Y high & low HAL_I2C_Mem_Read(&hi2c4

So I have a scroll list with several elements and snapping set to true. The scroll list can show up to 3 elements on screen with no scrolling.I can move the scrolling list both by scrolling and clicking two buttons (up and down) that basically use the animateToItem to move the scroll list to the first or last element.Now, because I have to update an image according to the element shown on the scroll list, I need to know if the first element or the last element of the scroll list is visible.Is there a way to do that or do I need to implement it myself?

Hello all, I am really new to TouchGFX and can't find a solution to my problem. I want to increase or decrease a displayed value on my screen by clicking on a button. I think I have to read the value each time by using getWildcard(). But now I have a data type conflict as I can't just handle it as an int and increase it. In the following you can see a picture of my screen. Thank you in advance :)  

Hi all,TouchGFX version: 4.16.1I have a slider that allows user to change the timer values. I have registered two callbacks (1) setNewValueCallback and (2) setStopValueCallback.When using simulator, when I simply click(no release yet) on some value on a slider that is different than the current value, I get a new value callback once. When I release the mouse button, I get another new value callback(which is expected based on the code I see in Slider.cpp), followed by stop value callback - total of three callbacks happen. This works without any issues in the simulator.On target, it works for the most part but every now and then I run into issues where when I click on a slider value, the slider jumps to zero position. I have also seen it jump to max position. I added some events in the both of those callback handlers to debug this further. When this issue is not happening, I see three debug events as expected as explained earlier in simulator case(two new v

Hello everyone,I have recently updated my project's TouchGFX version from 4.23.2 to 4.24.0. After the migration, I am no longer able to generate code from the TouchGFX Designer.The process fails during the "Generate Assets" step every time I click "Generate Code". I receive the following error message in the log:The error points to the rgb_compression setting. I have checked my application.config file, and the configuration is set to "no", as shown below:What I have tried so far:Manually changing the rgb_compression value in ap