STM32CubeMX (MCUs)

Hello, I have a question about STM32CubeMX regarding the STM32U5G7VJT6 MCU.STM32CubeMX 6/17.0 indicates that a non-existent SMPS power supply must be enabled for the STM32U5G7VJT6.However, this is the version without the 'Q' specified in the part number:Q = Dedicated pinout supporting SMPS step-down converter.When I call SystemPower_Config(), the microcontroller does not work; without calling this function, it works fine.Is this a bug in the STM32CubeMX, assuming only Q versions of this MCU exist?Best regards, Jack

 Hello,When I try to change the supply source in power parameters STM32CubeMX 6.17.0 does not seems to generate anything when LL is selected. With HAL the configuration is changed in the generated code. Am I missing something ?Thank you for your help !

Hi ,I am creating an LCD test project for the STM32N6570-DK using STM32CubeMX and STM32CubeIDE.I have started the cube mx project by selecting 'Access to board selector' menu from the cube mx. After enabling the LCD (LTDC) peripheral and generating the project, the build fails because required BSP  files are missing in workspaces.The error observed is:fatal error: stm32n6570_discovery_conf.h: No such file or directory#include "stm32n6570_discovery_conf.h"The error is caused by:#include "stm32n6570_discovery_conf.h"#include "stm32n6570_discovery_lcd.h"#include "stm32_lcd.h"However, CubeMX does not generate or populate the required BSP LCD files and dependencies automatically. Fixing one missing file leads to additional LCD-related build errors, indicating incomplete code generation.Please let me know solution for this other than copy in all the required files manually. I looking for solution related to

  Hi everyone,I think STM32CubeMX is generating an incorrect configuration for STM32L071.In CubeMX → System Core → SYS → System power supply,I selected Power Regulator = SMPS (instead of LDO) and generated the project.After code generation, I get build errors because CubeMX inserts code that does not exist for this device / HAL package:In stm32l0xx_hal_msp.c, I see references like: HAL_PWREx_ConfigSupply(...) PWR_SMPS_SUPPLY But for STM32L0 / my CubeL0 HAL, these are not defined

Hi,peripheral handles, either the dedicated ones or the labeled ones are usable only during runtime, they're filled with data at the initialization. However, it would be practical to also get a compile-time usable definition as well.So, for example if I label timer 3 as 'MyTimer', we'll get#define MyTimer htim3It would be practical to also get something like this:#define _MyTimer_ TIM3This would give access to e.g. register addresses at compile time. For example, if I want to create a pointer table to the timer CCRs, I can write:volatile const uint32_t *TabCcrPtr[] = { &_MyTimer_->CCR1, &_MyTimer_->CCR2, &_MyTimer_->CCR3, &_MyTimer_->CCR4 };The idea is to have shorter code using tables because it's not needed to use switch statements,

Hello, I'm using CubeMX version 6.17.0 on MacOS, with an STM32H503CBT6 mcu.I'm trying to use an external audio crystal with a frequency of 24.576mhz, after setting the new frequency in the clock configuration tab, I get the right value in the .ioc file.

Please note that maintenance on the user authentication service is scheduled for 26 February. During this period, some disruptions may occur. The impact is limited to versions earlier than STM32CubeMX V6.16 and STM32CubeIDE V2.0.0. The service returns to normal soon after maintenance is complete. What to do if you encounter a problem If you experience issues during the maintenance window, please use st.com or try again after one hour. If the problem persists after that time, contact us through the Community for further assistance.   Update 27 February 2026: The maintenance was successfully completed as scheduled on 26 February. If you encounter any issues, please do not hesitate to contact us.

STM32CubeMX v6.14.1 (Firmware Package is STM32Cube FW_G0 V1.6.2) has removed the option for peripheral I2C2 to select SMBus-two-wire-interface.This prevents me from migrating my project as only SMBus-Alert-mode is available but can't be used as the alert pin is already allocated for GPIO. So the CubeMX migration changes I2C2 to I2C mode.The original project is from STM32CubeMX v6.10.0 and the Firmware Package is STM32Cube FW_G0 V1.6.2I tried creating a project from scratch and the SMBus-two-wire-interface option just isn't available.

Hi,I am implementing DCMIPP configuration in that I am enabling the CSI but when I trying to enable the pin I cannot enable the the camera pins those pins are showing red. And I am unable locate .ioc file  for DCMIPP interface is there any .ioc file configuration please provide that.

Question for STM.Could you please advise what to do to make the environment generate audio files?Could anyone of you show me how to generate these files?They are generated for all classes except audio.I guess there should be these too.Alternatively, please show me how to create an AUDIO Device using the STM32H5 processor.Please for the msc class even adds  storage_configuration_number = USBD_Get_Configuration_Number(CLASS_TYPE_MSC, 0); storage_interface_number = USBD_Get_Interface_Number(CLASS_TYPE_MSC, 0); if( ux_device_stack_class_register( _ux_system_slave_class_storage_

In the update to CubeMX version 6.17, the SD card initialization (in my case, SDMMC2) was changed, and the software goes into "Error_Handler()". In my project I use STM32H7B0VBT6, FATFS, not RTOS.Specifically, version 6.17:static void MX_SDMMC2_SD_Init(void) { /* USER CODE BEGIN SDMMC2_Init 0 */ /* USER CODE END SDMMC2_Init 0 */ /* USER CODE BEGIN SDMMC2_Init 1 */ /* USER CODE END SDMMC2_Init 1 */ hsd2.Instance = SDMMC2; hsd2.Init.ClockEdge = SDMMC_CLOCK_EDGE_RISING; hsd2.Init.ClockPowerSave = SDMMC_CLOCK_POWER_SAVE_DISABLE; hsd2.Init.BusWide = SDMMC_BUS_WIDE_4B; hsd2.Init.HardwareFlowControl = SDMMC_HARDWARE_FLOW_CONTROL_DISABLE; hsd2.Init.ClockDiv = 10; if (HAL_SD_Init(&hsd2) != HAL_OK) { Error_Handler(); } /* USER CODE BEGIN SDMMC2_Init 2 */ /* USER CODE END SDMMC2_Init 2 */ } In previous versions:static void M

Version 6.16.1I have identified a number of bugs - collecting them here.  Note that these are time wasters, but there are workarounds - so they are not critical but would definitely aid in the usability/productivity of users.-If you use the XCube.AI software package to generate a template application, the template application will not build.  To fix it you have to add      #include "ai_platform.h"  at the top of the file under the other existing includes.-In the configuration for the individual networks for the XCube.AI, if you select the first profile "internal-memories-only--default" it will hang when analyzing and never complete.  The workaround is to use the n6-noextmem option which appears to accomplish the same thing-When first starting up CubeMX, when you select the XCube.AI option (the actual selection of the components for inclusion), even if you have  "FSBL" se

I used CubeMX to generate the "LoRaWAN_AT_Slave" example for the B-WL5M-SUBG1 board.I had some issues with it waking up from sleep and upon a few hours of debugging i found that the LSE Driver Config was set to LOW in the example application, but the datasheet recommends HIGH.Just letting other people with the same issue know and hopefully the ST-Team can fix the example configuration in future releases.

Environment DetailsMicrocontroller: STM32C091CBTx (LQFP48)STM32CubeMX Version: 6.14.1LL-DriverConfiguration: An STM32CubeMX project is configured for an STM32C091CBTx MCU, with DMA channel 6 assigned to a peripheral (ADC).Generated Code (stm32c0xx_it.c): Upon code generation, CubeMX creates the shared interrupt handler for DMA channels 4, 5, 6, and 7 in the stm32c0xx_it.c file. The function is defined as:void DMAMUX1_DMA1_CH4_5_6_7_IRQHandler(void)Startup File Vector Table (startup_stm32c091xx.s): However, the default startup file provided with the project contains an incorrect entry for this interrupt vector. The handler name in the vector table is listed as:DMAMUX_DMA1CH4_5_IRQHandlerConsequently, the `DMAMUX1_DMA1_CH4_5_6_7_IRQHandle

Hello I found this issue, I drop you my report (with IA helping to write it :) )**Component/Tool:** STM32CubeMX (code generation)**MCU:** STM32C071KBT3 (STM32C0 family)**FW Package:** STM32Cube FW_C0 V1.4.0**Configuration:** USB Device with USBX CDC-ACM class, bare-metal (no RTOS / no ThreadX)**Description:**When generating code for a USB Device project using USBX middleware (CDC-ACM class) in bare-metal mode (without RTOS), STM32CubeMX generates the peripheral initialization calls in `main()` in the wrong order:Generated code (incorrect):MX_USB_PCD_Init(); // Called FIRST MX_USBX_Device_Init(); // Called SECOND**Expected code (correct):**MX_USBX_Device_Init(); MX_USB_PCD_Init(); **Root cause analysis:**`MX_USBX_Device_Init()` calls `ux_system_initialize()` and `

Since there is no caregory to post for the MCU Finder tool I'm posting here. On Windows, the stand-alone app, as well as the Android app, do not show any content when filtering by the H5 range in the series field. Could this please be fixed? It's been like this for multiple months now. Thanks.

Hello,I'm using the STM32N657 on a new project, and its not clear how users are supposed to setup GPIOs that are used in different domains (FSBL, Application, ExtMemLoader).  For example I am using pin PN12 as a LED output and defined it in FSBL.  Why doesn't this definition carry over to the other domains, and how can I get CubeMX to carry it over to the other domains? thanksMatthew   

Hello,I’ve noticed a difference in behavior between STM32CubeMX configurations for STM32H7 and STM32N6 series.On STM32H7, when configuring CAN bit timing, the parameters such as Nominal Time Quantum, Nominal Time for one bit, and Nominal Baud Rate update dynamically based on the settings.On STM32N6 (using STM32CubeMX v6.16.0), these values remain constant. For example, even when using the official STM32 example with a nominal bit rate of 1 Mbit/s, CubeMX still shows a fixed value of 1000 bit/s and does not adjust the timing parameters.

I have an ST32CubeMX project for a STM32H7 mcu generated with STCubeMX 6.4 and using STM32Cube FW_H7 V1.9.1 where the project files are generated via cmake. Now I want to use STM32Cube FW_H7 V1.12.1, but apparently, in order to be able to generate the new files, I have to migrate the project to STM32CubeMX 6.16.1:The problem is that, once I click in "Migrate", it removes two important lines from my code:

Hello,I was playing around with different versions of MCU and I've notice STM32H7B3LIH has no Graphic Accelerator mentioned in Product Selector.But as soon as I'm selecting it in CubeMX I can enable DMA2D in Multimedia.And think there are more MCUs with Chrome-ART Graphic Accelerator which are not correctly shown in Product Selector.

Hello,Does anyone know how to setup the clock source for the N657 processor?  I want to use an oscillator for the HS clock input and setup HSE = Bypass clock source...using Bypass clock it should only use PH0 (clock in) and free up the PH1 pin (clock out).  But it seems the IDE / cubeMx always wants to use both pins regardless of the clock configuration.

Generating code for the STM32WLE5CBU.In timer_if.c:extern RTC_HandleTypeDef h;but in rtc.c:RTC_HandleTypeDef hrtc; It happened in CubeMx 6.16.1 and STM32Cube_FW_WL_V1.4.0 and is still happening using CubeMX6.17.0 and STM32Cube_FW_WL_V1.5.0

Hi. ST There is an error in the code that is generated by CubeMx when you use 16bit in SPI DMA transfer. Can be solved in the stm32h5xx_hal_msp.c file: /* USER CODE BEGIN SPI4_MspInit 1 */ memcpy(&handle_GPDMA1_Channel1.Init,&NodeConfig.Init, sizeof(NodeConfig.Init)); /* USER CODE END SPI4_MspInit 1 */   maybe ST will look into it? Using:  STM32Cube FW_H5 V1.3.0 STM32CubeMX: 6.12.1 MCU: STM32H573IIKxQ Best regards.  

Hi everyone, I’m new to STM32 development and need some help configuring CLion for working with STM32 microcontrollers. I have installed STM32CubeMX (version 6.13.0) and am trying to generate a project for my STM32F411CEU6 microcontroller. However, I’m encountering an issue where the Eclipse launcher fails to work, and I can’t proceed further. I’m using macOS Sequoia (version 15.2). Could anyone guide me through the process of setting up CLion on macOS to work with STM32? Any advice, steps, or resources would be greatly appreciated! Thanks in advance!

The HSEM option is not found in "System Core" in STM32CubeMX (version 6.15), and the configuration option for HSEM interrupt is only found in NVIC. How to configure HSEM in STM32CubeMX. When I selected the LL library environment, the generated source code did not import the HSEM LL library header file. How to solve these two problems? If it is not possible to configure and import the HSEM related library files into the project file in STM32CubeMX, please let us know.