Automotive and Transportation

Posted on November 03, 2014 at 19:16I have clear Windows 8.1 (just restored from rescue disks) on Lenovo T540p notebook. I setup latest version of spc5 studio. When I try to compile sample I get error messages. I mark with bold text error. Under Windows XP all ok. How I can fix this problem and use Windows 8.1 as development platform? ============================= 17:11:33 **** Build of configuration Default for project SPC56ELxx OS-Less CAN Test Application **** make -j8 all       0 [main] sh 4900 sync_with_child: child 1076(0x17C) died before initialization with status code 0xC0000142       11 [main] sh 4900 sync_with_child: *** child state waiting for longjmp  /usr/bin/sh: fork: Resource temporarily unavailable Compiling boot.s Compiling crt0.s Compiling ivor.s Compiling vectors.s Co

Posted on November 03, 2014 at 23:17How to reproduce 1) Open Spc5studio 2) Create test application for SPC56xL Discovery 3) Open PinMap Wizard 4) You can see pins 1-143. Pin 144 not exist Also image not match to image on  SPC56EL70L5 documentation. Some pins moved from side to side. For sample pin 36. This bug affect me. I can't assign pin mapping for CAN2 (A15-144) #bug

Posted on October 21, 2014 at 14:05Hello, I am not able to start SPC5 Studio after it crashes during I worked with the pin map wizard. When I start the application, it only shows me that an error log in the .log has been created. The entry shows me following errors:!ENTRY org.eclipse.core.resources 2 10035 2014-10-21 12:25:17.456 !MESSAGE The workspace exited with unsaved changes in the previous session; refreshing workspace to recover changes.!ENTRY org.eclipse.osgi 4 0 2014-10-21 12:25:17.861 !MESSAGE An error occurred while automatically activating bundle com.st.tools.spc5 (611). !STACK 0 How can I repair my workspace or create a new one without re-installing SPC5 Studio? Best regards, Patrik

Posted on September 30, 2014 at 14:45Hello, I installed SPC5Studio 3.0.0, and UDE 4.02.05. When i build a new project clicking on ''build all'' icon, SPC5Studio doesn't generate out.elf file, so i am not able to debug. I can debug Software examples for SPC56L-Discovery (dowloaded from the site), because they iclude the correct out.elf file, but if i modify a main.c file, then save and build the project, out.elf isn't updated. Thanks for any useful response. Best Regards Paolo Menoni

Posted on September 30, 2014 at 12:53Hi, I purchased a full license for 1-year, used it only for three months and today the error message came up as follow: main.c:1:0: internal compiler error: initialising license system Demo license has expired (-49) (Product: ppc-free-gcc, Version: 2013.01) I checked the license file HT_license.lic its header is as follow: LICENSE hightec-rt ppc-free-gcc 2013.01 19-mar-2015 uncounted I re-install the SPC5Studio 3.0 but the license installation encounter error and installation finished. Please help! My project is already overdue!

Posted on October 01, 2014 at 13:03Hello, Can anybody explain me the exact difference between the ADC precision channels and the ADC standard channels for a SPC560B? I read the ADC section within the reference manual, but I did not find any differences. Best regards, Patrik

Posted on September 23, 2014 at 15:46I am using UDE 4.2.05 with the SPC560B-DIS (which has UDE debug hardware built in) I can load and run code via JTAG but ... How do I access the serial port connection to the target device ??? The target microcontroller UART is connected to the FTDI USB/serial/JTAG device but I do not see a COM port show up on the PC for the target USB/serial connection. Should this show up as a COM port or perhaps in a UDE window ??

Posted on September 23, 2014 at 15:43What is the max SPC56 (SPC560B54L3) UART baud rate ? Thanks,   Stuart

Posted on September 16, 2014 at 16:03Hello, I would like to do some mathematical calulations like square root, sin, cos,... with the SPC560D. Does ST provide any libraries for that purpose which I can include in my SPC5 project? Best regards, Patrik

Posted on September 13, 2014 at 20:39Hi,I have tried to compile an example with the SPC5Studio Wizard and get the following errors: 20:36:34 **** Incremental Build of configuration Default for project ChibiOS-RT SPC56ELxx Test Application for DiscoveryPlus **** make -j4 all       0 [main] sh 1656 sync_with_child: child 3980(0x188) died before initialization with status code 0xC0000142      14 [main] sh 1656 sync_with_child: *** child state waiting for longjmp /bin/sh: fork: Resource temporarily unavailable Compiling boot.s Compiling crt0.s Compiling ivor.s Compiling vectors.s C:/SPC5Studio/eclipse/plugins/com.st.tools.spc5.components.platform.spc56elxx_1.0.0.201409031447/component/lib/src/boot.s:26:0: fatal error: opening dependency file .dep/boot

Posted on September 09, 2014 at 14:31Hello, Unfortunately, a few moments before I found out that I lost all changes I had manually done within the CAN low level drivers (changins in number of RX message buffers, filters, filter IDs, filter masks, ...). Just everything which I was not able to configure by using the SPC5 Application Configuration. I only wanted to change the compliler optimization level. Is there a way, how I can prevent several files from beeing new generated or cleared when I generate the application configuration? Or what is the best way when I wanted to adapt a project (for example using DSPI) without loosing all changes in the other HAL components? Best regards, Patrik

Posted on September 03, 2014 at 16:46Hello, on SPC56EL60, I'm using an external 16MHz XTAL so I changed the ''XOSC Clock'' value in the configuration (default is 40MHz). I'm getting the error: ''SPC5_FMPLL0_VCO_CLK outside acceptable range (SPC5_FMPLLVCO_MIN...SPC5_FMPLLVCO_MAX)'' To solve this I have to modify SPC5_FMPLL0_IDF_VALUE and SPC5_FMPLL0_NDIV_VALUE value's that are used to calculate SPC5_FMPLL0_VCO_CLK. These defines are code generated and I can't find them in the application config. Can you please explain how the setup the clock peripheral and keep the overide values unchanged while regenerating code? Thank you

Posted on August 27, 2014 at 11:25Hello, I tried to use the FMPLL as system clock, but I get a behaviour which I did not expect. As software basis, I used the test application for the SPC56xL discovery board. When I understand the clock configuration in the right way, this project runs with the 16MHz internal RC. I found the configuration in the file hal_lld.h, all modes are using the internal RC for example here:/** * @brief DRUN mode settings. */ #if !defined(SPC5_ME_DRUN_MC_BITS) || defined(__DOXYGEN__) #define SPC5_ME_DRUN_MC_BITS (SPC5_ME_MC_SYSCLK_IRC | \ SPC5_ME_MC_IRCON | \ SPC5_ME_MC_XOSC0ON | \ SPC5_ME_MC_PLL0ON | \ SPC5_ME_MC_PLL1ON | \ SPC5_ME_MC_FLAON_NORMAL | \ SPC5_ME_MC_MVRON) #endif /** * @brief RUN0 mode settings. */ #if !defined(SPC5_ME_RUN0_MC_BITS) || defined(__DOXYGEN_

Posted on August 08, 2014 at 11:41 Hi community, I am having trouble using the sprintf function to convert a variable into a string. It compiles just fine if I do char string[11]; sprintf(string, ''23''); And I can see the numer 23 in ''string'' while debugging. But just using a variable instead of the number, like int data = 23; sprintf(string, data); throws these errors: undefined reference to `__HEAP_END' SPC563Mxx OS-Less Test Application line 37, external location: \data\distribution\free-entry-toolchain-v4.6.2.1\gcc-4.6.x\libhtcos\ppc-vle\libos_sbrk.c C/C++ Problem undefined reference to `__HEAP' SPC563Mxx OS-Less Test Application line 0, external location: c:\spc5studio\eclipse\plugins\com.st.tools.spc5.tools.hightec_1.0.0.201306281422\hightec\ppc-ht-eabi\lib\vle\libos.a(libos_sbrk.o) C/C++ Problem undefined reference to `__HEAP' SPC563Mxx OS-Less Test Applic

Posted on March 05, 2014 at 05:37Something wrong with dspi ?I have try debug with code for spi output signal with dspi module, it's not running. need some advidethis my code init :void initDSPI(void){ SIU.ISEL2.R = 0x0; DSPI_B.MCR.R = 0x80010000; // Configure DSPI_B as master DSPI_B.CTAR0.R = 0x78003255;; // Configure CTAR0 //DSPI_B.MCR.B.HALT = 0x0; // Exit HALT mode: go from STOPPED to RUNNING state SIU.PCR102.R = 0x0600; // DSPI_B_SCK SIU.PCR103.R = 0x0500; // DSPI_B_SIN SIU.PCR104.R = 0x0600; // DSPI_B_SOUT SIU.PCR105.R = 0x0600; // DSPI_B_PCS[0]}and this one is code function, it's call in main program :uint8_t EEPROM_WRITE_CMD(uint8_t cCmd, uint8_t cData){ uint8_t iloop; if(cCmd == 1){ EEPROM_CS = EEPROM_ON; DSPI_B.PUSHR.R = 0x08010000 | cData; for(iloop=0;iloop<0xFF;iloop++);

Posted on August 14, 2014 at 12:51Hello, I am using the iC5000 from iSYSTEM for programming and debugging. ISYSTEM provides a winIDEA plugin for Eclipse. Does anybody know if this plugin is supported by SPC5 Studio? Or has anyone even tested the plugin with the SPC5 Studio? Best regards, Patrik

Posted on July 27, 2014 at 10:01Hello, This question is propably really basic, but I hope to get any advice, a link to a tutorial or even a sample code which helps me to solve my problem. I am really new in this buisness. The possibilities of the SPC56 controller familiy are huge but as a beginner their complexity confuses me. My setting is a SPC56xL Discovery Kit and the SPC5 Studio in combination with the High Tec C compiler. What I want to do is normally very simple. One of the LEDs (e.g. LED D5 on Pin A0) should be controlled by the button S2 on Pin G8. Therefore, my idea was to use an interrupt triggered by the button S2. I set up a small project, using the OSAL-HAL component. But I really have no idea how and where i should implement this functionality in my C code. All what I have done so far is configuring an interrupt vector, but I am even not sure if i did this in the correct way. The main questions for me are:

Posted on August 04, 2014 at 17:22Are there any example projects for the SPC564A on the SPC56xxMB EVAL board that show how to use external RAM?If not complete projects, any code snippets or even hints or advice?ThanksKevin

Posted on July 31, 2014 at 10:13Hello, Are any FlexRay available for SPC56 devices? Thanks 

Posted on July 30, 2014 at 04:54I've compiled some code & I have .bin/.dmp/.elf/.hex/.map files. How do I program/flash whichever I need to flash into spc563M-disp board? I do have a PLS device, the driver and UDE Desktop installed. While AN4425 promises ''The document UM1602 (see Reference documents) is focused to describe and to understand how to use SPC5studio and how to create, build and debug a project.'', I do not see the word ''debug'' mentioned in UM1602 SPC5 Studio users guide even once, but maybe I am doing something wrong. Please advice.

Posted on July 24, 2014 at 12:44Hello, I installed SPC5 Studio and everything works fine and then after a view hours of working, i can´t build my project any more. I am always getting following error and i don´t know why: make -j4 all Cannot run program ''make'': Launching failed 12:30:14 Build Finished (took 47ms) I did not change anything in the settings, just using the SPC5 Studio as it is configured after the installation. But this error seems to come up randomly after a while. So i re-installed SPC-Studio several times. After the installation it worked again and I was able to build my projects. But during working on my code a get the same error again and again after a while. What could be the reason for that error upcoming randomly? I am using the 30days evaluation license from High-Tec.

Posted on July 10, 2014 at 14:34Hello, I want to use canReceive and specify the mailbox to read (do not use CAN_ANY_MAILBOX). Example: if I want to check the first mailbox, I use:canReceive(can1.canp, 1, &rxmsg, TIME_IMMEDIATE) == MSG_OK canReceive first checks if the buffer received data using the can_lld_is_rx_nonempty function. If you give the mailbox number 1 to this function, it checks the mailbox 0 (BUF[0]). The problem is that next to this check, the function can_lld_receive will access the second mailbox (BUF[1]). To fix this, I suggest to define CAN_ANY_MAILBOX to 0xFF and change the switch values in can_lld_is_rx_nonempty from 1-8 to 0-7. My target is SPC56EL60 but it applies to all families and I use SPC5 Studio. Is it a bug or I missed something? I can't update SPC5 Studio at the moment, this bug is maybe already fixed.

Posted on July 15, 2014 at 21:38I have a project that requires an IO pin to switch between High Z (Tri-State) and High. On a previous 8 bit micro the high z condition was satisfied by setting the port to an input and the high was satisfied by making the port and output and driving it high.I am using the Hal drivers for non-OS and am strugglinig to find the commands to do this. I tried doing the following with o results:// Set Charge to Output and Set HighpalSetPadMode(PORT_B, CHARGE, PAL_MODE_OUTPUT_PUSHPULL);palSetPad(PORT_B, CHARGE);        // Delay 5us//osalThreadSleepMicroseconds(CHARGE_WAIT);osalThreadSleepMicroseconds(50000);        // Set Charge to Input and set to high zpalSetPadMode(PORT_B, CHARGE, PAL_MODE_INPUT);I played with different delay lengths thinking the scope missed it.Pl

Posted on July 15, 2014 at 16:05Hello, The software update complains (see below log). The proxy is correctly configured. The update list is found but when it downloads the files, the error is coming. My browser can access the jar file so the links are ok... Any suggestion?An error occurred while collecting items to be installed session context was:(profile=profile, phase=org.eclipse.equinox.internal.p2.engine.phases.Collect, operand=, action=). Unable to read repository at http://spc5.drive.cloudforge.com/projects/spc5releases/SPC5Studio_Update_Site/plugins/com.st.tools.spc5.wizard.pinmap.help.en_1.0.0.201407091613.jar. Read timed out Unab

Posted on July 07, 2014 at 17:51Hi, I hope this error is common for Eclipse users... Directly after installing SPC5 Studio V3 and setting up the one-year licence, I'm able to get all SPC56EL60L5 examples from the SPC5 Studio Wizard working (on the board, CAN not in loop mode, ADC...). But it seems that I click somewhere I should not because it always ends after some time (PC reboot, app restart...) with the below compiler errors. My target is SPC56EL60L5. I also noticed that the Wizard is not available anymore (File->New and toolbars). It sometimes compiles again after reboot, or combinaison of clear project/generate/build... I can't get it... The make command in a DOS window returned the error ''libintl3.dll is missing'' so I installed it. Now the command ''make --version'' gives: GNU Make 3.81 Copyright (C) 2006 Free Software Foundation, Inc. This is free software; see the sou