Automotive and Transportation

Posted on June 20, 2014 at 11:41C90FL program fails due to alignment error but all parameters check out?Parameter details before call:dest       size       source     result = C90FL_ERROR_ALIGNMENT0x00008000 0x00000100 0x40005300 0x000001000x00008100 0x00000100 0x40005300 0x00000100From UM1627, p.15, table 18, Troubleshooting for FlashProgram()C90FL_ERROR_ALIGNMENTThis error indicates that dest/size/source isn�t properly alignedCheck if dest and size are aligned on double word (64-bit) boundary. Check if source is aligned on word boundary.Ok my checks,0x8000 & 8 = 0 so aligned to 64bit/double word boundary0x100 & 8 = 0 so aligned to 64bit/double word boundary0x40005300 & 8=0 or 0x40005300 & 4=0 source is aligned to 32bit and 64bit brouna

Posted on June 11, 2014 at 14:55 Hello, I'm trying to create new project (Starting Code Generating) with SPC5 Studio Version (2 or 3) for SPC56B/Cxx Series. But It doesn't generated. SPC5 Console Out: Begin processing component resource com.st.tools.spc5.components.platform.spc560bcxx_1.0.0.201405131114/component/root_wo/ > Processing main.c > Processing debug.wsx > Processing stm_xpc560b_minimodule_debug_jtag.cfg > Processing user.mak Begin processing component resource com.st.tools.spc5.components.platform.spc560bcxx_1.0.0.201405131114/component/root_wa/ > Processing application.ld.ftl Error: Expression conf.instance.runtime_settings.irq_stack_size.value[0] is undefined on line 28, column 29 in application.ld.ftl. Error: FMPP processing session failed. Error: An error occurred while generating component SPC560B/Cxx Platform Component Begin processing component resource com.st.tools.spc5.components.platform.spc560bcxx_1.0.0.201405

Posted on June 16, 2014 at 12:07spc560b64l ssd flash api with eval of spc5?Hi,Re=post since no reply - Cheers ST!I am using an evaluation of SPC5 and want to start playing with the flash controller in mcu, my device is spc560b64xxx.I have read about SSD in pdf:http://www.st.com/st-web-ui/static/active/en/resource/technical/document/user_manual/DM00082034.pdfI have downloaded the zip file from the bottom of this page:http://www.st.com/web/catalog/tools/FM147/CL1794/SC1809/SS1686/PF258748It contains an EXE with what I think is a prebuilt C90LC library but I canno

Posted on June 01, 2014 at 08:06Is SPC5 Studio V3 available? Based on http://www.st.com/web/en/catalog/tools/PF255702 it would indicate V3.0 is available, but download from SP store is V2.0, files dated 12/10.2013. What new features are planed for V3.0?

Posted on May 27, 2014 at 10:43Hi, I downloaded example software SPC56EL and successfully imported all of them but then i can't get them compiled. I don't know how to set current toolchain and current builder, keeps giving me make error about object files.Thanks for the help!!

Posted on May 23, 2014 at 19:21Can anybody offer any knowledge of using STANDBY mode?  I am putting the chip in STANDBY and it appears to go there, as the processor goes dormant until I cause a wakeup event.  But the current draw on the VDD_LV power-input (2.1v) is ridiculously high (~100ma).   I've confirmed that the power is not going out the ports - those are all ok - it appears to be going to core/peripherals (hence VDD_LV).  Following the spec carefully, with weeks of scrutiny and experimentation.   Can give more details if anybody has experience here... tnx, -mark #powerconsumption-power-standby

Posted on May 06, 2014 at 16:49Hello,I am searching for XPC560BADPT208S mini module realated docs, but i can't found it, any help of any related docs is higly appreciated. 

Posted on April 03, 2014 at 12:21Hi, I'm trying to setup an analog conversion on SPC560D40L1. I activated the ADC in HAL configuration, defined a adc-conversion-group that consists of channel 0 (ADC1_P[0] on Pin PB4). The ADC does not finish the sample. The ADCD2 state is ADC_ACTIVE and the ADC_MSR.ADCSTATUS is 0x4(Sample). The values in the buffer stay unchanged. My Settings for the conversion group ''Precision'': - Linear, Max Sequential: 4 - Watchdog functions are all disabled - Channel Settings: Inital: 0, Number of channels: 1 - Timing: CTR0_INPLATCH = 1, OFFSHIFT = 0, INPCMP = 2, INPSAMP = 9, CTR1,2 the same - No callbacks are used In the eDMA_MUX_Settings, ADC uses DMA2. My Programm looks like this: int main(void) {     uint16_t adcBuffer[4];          componen

Posted on March 31, 2014 at 20:03Hi, it's my first Project with a SPC560D40 an SPC5 Studio. I'm trying to generate PWM-Signals on the Pins RA0 to RA5. When I look in the eMIOs Settings of the SPC560Dxx HAL Driver Component, I can only activate eMIOs group 0 (Channel 9..15) or Group1 (Channels 17..23) but RA0 to RA5 should be Channel 0..5. For these Channels I can only activate ICU drivers. Is this right? Is there an other way to activate PWM on these channels? The provided documentation for SPC5 is very rare. Can I programm it in my own driver? Thanks for help StefanP

Posted on March 19, 2014 at 12:34I do not know why ST does not have GHz range Cortex A8 processors like TI,freescale,samsung,...? I think ST can produce them with low cost of samsung but at the quality of freescale or better. ST have stm32 in cortex M but nothing in A8 GHz range! Is there any problem?

Posted on February 19, 2014 at 03:23Hi, I'm starting to use a SPC56L-Discovery board that I connect with the PC through the SPC5-UDESTK jtag-usb adapter. I installed the SPC5Studio and the UDE 4.0 to debug my board and load programs on it. But I have a ''strange'' error following the steps of the document AN4321 �Getting started with the SPC56LDiscovery�. In fact, all goes perfectly when I generate and compile the application, but when I try to debug it (and automatically it opens the UDE) I have this error:-Message from component 'PpcJtagTargIntf' :  Can't connect target !    Message from component 'PpcJtagTargIntf' :  No Lockstep mode on target detected when using LSM configuration !    Message from component 'PpcJtagTargIntf' : 

Posted on January 17, 2014 at 22:35With the ST & Freescale alliance and some chips being the same, I wonder if mpc563mzp66 is one of them? If it is, how would I figure out the ST part name? As far as I know it is not as as easy as just swapping the leading M with an S.

Posted on February 05, 2014 at 09:13Dear Sir/Madam,When working with UDE Visual Platform it is possible to view the status of a certain variable. However, in my case it is not possible to view the status of those variables. According to PLS this is due to the fact that no DWARF information is included in the .elf file.However, SPC5 Studio has defined -ggdb in the common options and this should include DWARF version 2. However, it seems that nothing is included. I am using the compiler ppc-vle-I am looking forward to your repsonse.Gijs----- edit 20140206-------I have solved the issue

Posted on January 24, 2014 at 17:27Hi, I have downloaded last version of SPCStudio: v. 2.0, this is version written in the web page, but the files refer to version 1.3.1. In past  i have downloaded version 1.3.1, but Help-->About SPC5Studio refer ''Version: 1.3.0''. One revision lesser level. At this time I have a question: -last SPC5Studio version is 2.0 or 1.3.1? -other have downloaded version 2.0 or 1.3.1? #2.0

Posted on January 27, 2014 at 15:10Hello,I have ordered and received the following product:SPC5-UDESTK-FULL.This came with a card with a key on it. When I input this key into the website: http://register.hightec-rt.com/ I get the message:Please enter your Activation key in the format 1234-5678-1234-5678 !My key however contains both letters and numbers. Not only numbers. It got accepted by the website from PLS however and I am running the UDE now using this activation code.As long as I don't have the right activation code I keep getting the error: internal compiler error: initialising license system No license for product (-1) (Product: ppc-free-gcc, Version: 2013.01)in SPC5 Studio.I am looking forward to your reply.Thanks!Gijs #compi

Posted on January 08, 2014 at 19:55I would like to start playing with the SPC56 in my free time and would like to use the TPU however I can't afford any of the expensive compilers just for a hobby.Does GCC or another compiler support the TPU? Or do any have a license in the reasonable range for a personal license (~$100).

Posted on October 10, 2013 at 15:11I'm evaluating SPC5 studio. I have installed : 1) SPC5 Studio 1.3 downloaded form st site 2) SPC5-UDESTK (128K limited edition) file ude-4-00-09-spc5-udestk.exe downloaded form http://www.pls-mc.com/spc5-udestk In both instruction (st and pls) I found : ''Run setup.exe and follow in the installing instructions. The SPC5-UDE/STK starterkit version will be installed into the directory C:\SPC5Studio\ude '' But I haven't run.exe and nor st_spc5studio nor pls_ude_... create the C:\SPC5Studio\ude folder. Where I can found a complete project with a configured debugger example? Thanks for any useful response Best Regards PDP

Posted on November 11, 2013 at 04:06Pad configuration information is needed for the SPC56xxMB EVAL board with the SPC 564AADPT324S mini-module. On the SPC564A (324 pin package), almost all of the eTPU2 and eMIOS pins are multiplexed. For example, on the dev board, pin header PJ9 shows a pin labeled ETPUA11. On the SPC564A, etpu channel 11 may be assigned to pad 125 (physical pin number AB4) or pad number 144 (pin L4). There is no way of knowing how the board was routed. These pins are assigned in the SIU at runtime.So far, I have been using the trial and error method, but this is not really acceptable when trying to develop a complicated eTPU routine.Is the pad configuration information available? A copy of siu_init.c would probably be easiest.ThanksKevin

Posted on July 10, 2013 at 10:56Hello, I am trying to configure the ADC to be triggered by the CTU. But using a debugger I can see, that many of my configurations made in Tresos are not taken over to the �C registers. As far as I can see the ''init'' code parts are executed as long as  ADC_ResultsBufferPtr[] inside the genrated file Adc_Cfg.c contains NULL_PTR. Sadly I am not able to find the correct setting to get some values in ADC_ResultsBufferPtr[]. How do I get rid of the NULL_PTR entries. Thanks #spc56

Posted on October 31, 2013 at 12:20Hello, i have a question. Bulding CAN code based on example for SPC56ELx produce this error:build/obj/can.o: In function `canStart': can.c:(.text_vle.canStart+0x2c): undefined reference to `osalThreadSleepS' collect2: ld returned 1 exit status make: *** [build/out.elf] Error 1 CAN configuration it is same that example. But i have added Chibios. I have replaced osalThreadSleepS(1) with osalThreadSleepSeconds(1) in :C:\SPC5Studio\eclipse\plugins\org.chibios.spc5.components.spc5hal_1.0.0.201310031641\component\lib\src But it seem  not correct. Why compiler don't find function osalThreadSleepS?  there are conflicts with Chibios? #osalthreadsleeps #can

Posted on January 21, 2013 at 12:51SPC5 studio can be downloaded at the following link. http://www.st.com/SPChttp://www.st.com/SPC5studio  #spc56

Posted on October 26, 2013 at 20:29I would like to know if  SPC5 Studio and ChibiOS can be used as tool chain for Freescale MPC5634 which has similar Core to ST SPC563M:  E200z3 ?   #spc5studio

Posted on October 18, 2013 at 16:46I just installed SPC5Studio, and tried to create new project called FirstSPC5Project.  I went through File->New->C Project and created the Hello World project.  I chose to put project in a custom location.  The project seems to have been created and put where I expect on my hard drive but it does not show up in the Project Explorer.  The only things I get in the project explorer are a bunch of example projects. I've attached a word file with a screen shot showing that the project is not there.  Any help is appreciated.  This is indeed my first SPC5 project so it is quite possible I am missing something obvious.

Posted on October 04, 2013 at 12:35Hi, i cant install SPC5 Studio. I run SPC5Studio v1.2.1.exe as Admin on Win7 64bit, but it fails and reports: ''Unable to save file: C:\WINDOWS\Downloaded Installations\... Studio.msi'' i click OK, a directory chooser pops up, i choose a directory i am guaranteed to have write access to, after a little while another message pops up: ''1628: Failed to complete installation'' hitting OK, this window closes, end of story. on my System ''C:\WINDOWS\Downloaded Installations\'' does not exist. how can i get SPC5 Studio installed on my Win7 64bit System? regards rainer

Posted on June 25, 2013 at 11:28Hello,I am using SPC564  MC, I am trying to set the DMATXE but i never responds it's always zerothe UART using DMA always sends 4 bytes and stops sending , I am suspecting the DMATXE bit as it's always zero.so how to set the DMATXE bits  #linflex-uart-dma-dmatxe