STM32 MCUs Security

Hi, I am trying activate read protection to level-1 with using batch(.bat) file. I am commanding to ST- Link Utility via batch file. My batch file code is like that:@ECHO OFF"C:\Program Files (x86)\STMicroelectronics\STM32 ST-LINK Utility\ST-LINK Utility/ST-Link_CLI.exe" -c SWD -OB RDP=0 -ME -P C:\gok.hex -V "after_programming" -OB RDP=1 PAUSEExplanation of code is;-c SWD : connects to device-OB RDP=0 : sets read protection level to 0-ME: mass erase-P c:\gok.hex : program hex file to flash-V "after_programming": verify if programmed correctly-OB RDP=1 : set read protection to level 1When I execute batch file it's programming and verifying the selected .hex file and setting read protection to level 1 but my code is not running in the mcu. I tried reseting after executing the batch file but it didn't help. If I erase the "-OB RDP

Make make clean Cannot run program "make": Launching failedError: Program "make" not found in PATHPATH=[C:/ST/STM32CubeIDE_1.4.2/STM32CubeIDE/jre/bin/server;C:/ST/STM32CubeIDE_1.4.2/STM32CubeIDE/jre/bin;C:/ST/STM32CubeIDE_1.4.2/STM32CubeIDE/jre/lib/amd64;C:\Program Files (x86)\Common Files\Oracle\Java\javapath;C:\Program Files (x86)\Intel\iCLS Client\;C:\Program Files\Intel\iCLS Client\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\System32\WindowsPowerShell\v1.0\;C:\WINDOWS\System32\OpenSSH\;C:\Program Files (x86)\Intel\Intel(R) Management Engine Components\DAL;C:\Program Files\Intel\Intel(R) Management Engine Components\DAL;C:\Program Files (x86)\Intel\Intel(R) Management Engine Components\IPT;C:\Program Files\Intel\Intel(R) Management Engine Components\IPT;C:\Program Files (x86)\IVI Foundation\VISA\WinNT\Bin\;C:\Program Files\IVI Foundation\VISA\Win64\Bin\;C:\Program Files (x86)\IVI Foundation\VISA\WinNT\Bin;C:\Program

I've ported the SBSFU package for my user app. It works great when only read out protection is enabled. Everything works as it supposed to. However, when I activate other security flags random errors/problems arise in the code. For example, when I activate the PCROP, a timer based PWM stops working. I'm using HAL library for this PWM so I'm not sure how the error might come from my code. TIM_OC_InitTypeDef sConfigOC; sConfigOC.OCMode = TIM_OCMODE_PWM1; sConfigOC.Pulse = (uint32_t)dCycle*10; // 1000 count PWM timer sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH; sConfigOC.OCFastMode = TIM_OCFAST_DISABLE; HAL_TIM_PWM_ConfigChannel(hboard.release_tim, &sConfigOC, TIM_CHANNEL_1); HAL_TIM_PWM_Start(hboard.release_tim, TIM_CHANNEL_1);I've had trouble with other security flags too. For example when I activated MPU_USERAPP my user app starts started to consistently crash with hard faults in a module so I deactivated it. The funny thing is that after some

Hi guys,I'm currently utilising SBSFU as an external flash secure bootloader (with all security settings turned off for debug) using the STM32H7B3's OTFDEC (On-the-fly Decryption) peripheral.My user application boots and runs via the OFTDEC and memory-mapped OCTOSPI flash just fine via the SBSFU bootloader mapping to the region 0x90000000, however, whilst I'm able to attach my debugger to the process and see and step through lines of assembly, as soon as I load my linker file to link the process to my source code via LOAD %L INCREMENTALI receive an error 57: illegal address (0x90000400) which is the correct and seemingly valid memory-mapped start address of the application. The keyword INCREMENTAL makes sure that the debugger doesn't restart the CPU when adding the linking information so the OTFDEC mapping should still be valid.Does anyone have any suggestions or experience in debugging memory-mapped pro

I have a SPI on STM32F746 configured:/* SPI6 init function */void MX_SPI6_Init(void){ hspi6.Instance = SPI6; hspi6.Init.Mode = SPI_MODE_MASTER; hspi6.Init.Direction = SPI_DIRECTION_2LINES; hspi6.Init.DataSize = SPI_DATASIZE_16BIT; hspi6.Init.CLKPolarity = SPI_POLARITY_LOW; hspi6.Init.CLKPhase = SPI_PHASE_2EDGE; hspi6.Init.NSS = SPI_NSS_HARD_OUTPUT; hspi6.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_4; hspi6.Init.FirstBit = SPI_FIRSTBIT_MSB; hspi6.Init.TIMode = SPI_TIMODE_DISABLE; hspi6.Init.CRCCalculation = SPI_CRCCALCULATION_ENABLE; hspi6.Init.CRCPolynomial = 32773; hspi6.Init.CRCLength = SPI_CRC_LENGTH_16BIT; hspi6.Init.NSSPMode = SPI_NSS_PULSE_DISABLE; if (HAL_SPI_Init(&hspi6) != HAL_OK) {  Error_Handler(); }

Hi All,We are launching one of our product to market. And we are using STM32F429ZiT6 MCU.Recently I am going through the data sheet for list of option bytes which needs to be set during manufacturing. I have an understanding on what should be set. But I just want to confirm my understanding and these will serve the purpose.Below is our application roughly. In the first 3 sectors we have the bootloader-------- which never changesWe do an OTA for the application. So the rest of sectors are divided in to 2---1 for main application....1 for back up. The rest of sectors(4-24) are divided into 2 -----10 sectors each for --- application and back upso we do write and erase operations from sector 4-24.So given the above situation.The option bytes we are setting is RDP- > Level 2(0xCC) because no one must be able to read through JTAG, SWV,...etc

When comparing installation results with contents of Security_WS_Tools_Installation.pdf, there are the following inconsistencies: Running C:\STM32SecuWS\Tools\Other\CheckEnv.bat does not complete, as it requests STM32CubeProgrammer v2.5.0, whereas STM32CubeProgrammer v2.4.0 is the version installed by the installer. When opening ZIP File, directory C:\CSTM32SecuWS\L4 only includes subdirectory STM32CubeExpansion_SBSFU_V2.4.0, but not >Scripts or >FinishedProjects

..

Is it a problem if I join the meeting at 9:00? Before I have to take the children to school

Under SBSFU, I am able to run my custom application, and everything run fine. But changing the SFU defualt UART.with USB throughing error "USB Device not recognize!!!", I debug through SBSFU code, and USB stack(CDC and Devi ce only Configuration) initialize correctly.I will highly appreciate for any help.With regardsJitu

Hi,I am currently going through the "STM32 security in practice workshop" which is for the G0 and I really like it.Now my target is a G4 with dual bank. So I wonder if you have some code for this MCU as it probably needs some more settings to add because of its 2 banks. Or does the HAL refer to bank 1 (where the bootloader is) anyway by default? I do NOT need 2 images, just to handle the dual-bank design properly when adding the protections.You don't set the secure memory area in code in the workshop. Is there any special reason for this and can this be done from code?And what is actually the difference between the code presented in the workshop and the X-CUBE-SBSFU. Which is recommended to use? I find the practice workshop easier to understand and implement than the SBSFU. Additionally, SBSFU projects do not seem to be based on CubeMX (.ioc) and therefore don't offer easy implementation of modern bootloaders using FD-CAN or similar as far

I'm registered for the Dec 3 workshop, but haven't received the hardware yet. Please advise, thanks.

Porting to STM32F429VIT6 from STM32F413HChanged made so far:1) Choosing the example from the same STM32 family as starting point if possibleSTM32F413H Discovery example chosen: 2) Editing the used IDE configuration files to rename what needs to be renamed to adapt to your target: This step is not usually manadatory3) Adapt the mapping to your flash (files in Linker_Common). Use documentation to understand underlying constraints (sector size, write protect size, etc ...)The linker script has been updated to for the 2Mbyte flash on the STM32F429xx Dual Bank from the 1.5 Mbyte Single Bank4) Adapt the USART port used for interfacing with secure boot and application (header file located in target directory of SBSFU and example application)The USART port has been changed to USART3 which is part of the JTAG connector. Tested with an application firmware and it works fine)5) Adapt the clocking to y

HelloI am using Buildroot instead of Yocto with STM32MP157C and I wanted to know if there is a difference while parametrizing security features on my MPU and if the community.st.com website is relevant in my case or not.Best regards

..

Running USB virtual serial port program separately is normal,but download the virtual serial program through sbsfu, USB can't recognize it.Can you give me some suggestions,thankyou very much.

I'm trying to finish a first homework related to the SBSFU. I can build the SECoreBin project which at the end generates the SECoreBin.bin file. So it works fine. Next I try to build the SBSFU project but then I get "Nothing to build for project STM32L476RG_NUCLEO_2_Images_SBSFU"Building the UserApp ends with an error:c:\st\stm32cubeide_1.4.2\stm32cubeide\plugins\com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.win32_1.4.0.202007081208\tools\arm-none-eabi\bin\ld.exe: cannot find -l:se_interface_app.o collect2.exe: error: ld returned 1 exit status make[1]: *** [makefile:58: UserApp.elf] Error 1 make: *** [makefile:51: all] Error 2 "make all" terminated with exit code 2. Build might be incomplete.All the tools are installed correctly, Java is updated.Michal

Hello, here is my situation, I've got accepted at the 12th November workshop, but because the boards were delivered with some delay (received them on 18.11.2020), I couldn't participate to that workshop. Now I have the boards and I would like to attend the workshop on 24.11.2020 or 03.12.2020, is it possible?

I'm trying to set read protection on STM32F412 to level 1 via JLink during initial flashing. I'm issuing next commands:J-Link>w4 0x40023C08 0x08192A3B Writing 08192A3B -> 40023C08 J-Link>w4 0x40023C08 0x4C5D6E7F Writing 4C5D6E7F -> 40023C08 J-Link>mem32 0x40023C14 1 40023C14 = 0FFFAAEC J-Link>w4 0x40023C14 0x0fff55ED Writing 0FFF55ED -> 40023C14 J-Link>mem32 0x40023C14 1 40023C14 = 0FFF55ED J-Link>r Reset delay: 0 ms Reset type NORMAL: Resets core & peripherals via SYSRESETREQ & VECTRESET bit. Reset: Halt core after reset via DEMCR.VC_CORERESET. Reset: Reset device via AIRCR.SYSRESETREQ. J-Link>mem32 0x40023C14 1 40023C14 = 0FFFAAED But AFTER rest and BEFORE any user code can run it self-resets from 0x55 - LEVEL1 to AA - LEVEL0.A few hours before this happened I was able to lock it from bootloader with next code: FLASH_OBProgramInitTypeDef flash; HAL_FLASH_OB_Unlock(); flash.RDPLeve

The installation instructions give dire warnings not to press OK until the installation has finished:and, indeed, the popup appears - saying "finish the ongoing installation":But the popup blocks the installation from proceeding - all progress stops!!So what am I supposed to do?

Hi all,I'm trying to add the STM CRC32 to the hex or axf file, after this I need to convert it to .bin file because I've a Bootloader and I want to check the CRC32 to see if there's a valid image stored. I'm using srec_cat but doesn't work. Thanks.

Shared in the Google Drive is Security_WS_Tools_Installation.pdfLinked from the email is Security_WS_Tools_Installation_V3.pdf:https://www.st.com/content/dam/OLM%20Email%20Marketing/2020/EMEA/Events/Security%20workshop%20-%20second%20part/Security_WS_Tools_Installation_V3.pdfThe _V3 suffix suggests a later version - so, presumably, that's the one to use?

The download & decryption & swapping of the firmware looks fine at first sight.But then a critical failure occurs because additional code is detected beyond the FW image.====================================================================== = (C) COPYRIGHT 2017 STMicroelectronics = = = = Secure Boot and Secure Firmware Update = ======================================================================     = [SBOOT] SECURE ENGINE INITIALIZATION SUCCESSFUL = [SBOOT] STATE: CHECK STATUS ON RESET INFO: A Reboot has been triggered by a Hardware reset! INFO: Last execution status before Reboot was:Executing Fw Image. INFO: Last execution detected error was: No error. Success. = [SBOOT] STATE: CHECK NEW FIRMWARE TO DOWNLOAD = [SBOOT] STATE: DOWNLOAD NEW USER FIRMWARE File> Transfer> YMODEM> Send [Ready to receive].[EOT]. FwSize=-16843010 | PartialFwSize=-16843010 | PartialFwOffset=-16843010 | 33632 bytes received = [SBOOT] STATE: REBO

Hi there..It will great to have a walk through about porting the SBSFU on a custom boards!!!I followed the instructions in the "Getting Started with SBSFU....." AppNote, but it's not working. I will highly appreciate you for any help.ThanksJitu

Dear st team,  I have a development issue when running TFM example application at STM32L562.After download the tfm_s_enc_sign.bin through ymodem,print error log"[ERR] Image in the secondary slot is not valid!" when secure boot .ALL other 3 bin（tfm_s_sign.bin，tfm_ns_sign.bin，tfm_ns_enc_sign.bin） download success.    I follow the document UM2671 chapter 11.4 Download a new firmware image.    The project is en.stm32cubel5_v1-3-0.zip，file：Projects\STM32L562E-DK\Applications\TFMSteps to reproduce:1.run Projects\STM32L562E-DK\Applications\TFM\TFM_SBSFU_Boot\MDK-ARM\regression.bat to init device2.build TFM_SBSFU_Boot application，TFM_Appli secure application，TFM_Appli non-secure application，Build TFM_Loader application3.run Projects\STM32L562E-DK\Applications\TFM\TFM_SBSFU_Boot\MDK-ARM\TFM_UPDATE.bat to programing into STM3