STM32 MPUs Software development tools

Burning STM32MP1 via USB DFU works fine. When I try to burn via USART I stick with errors:GetPhase command not acknowledged after 3 retriesParition 0xbb not found in TSV FileFlash layout is the same in both cases (attached). Is it possible to burn STM32MP1 from anything else than USB DFU (USART or JTAG/SWD) ?

I've been using the Windows version of STM32CubeIDE for a while but had to switch to the Linux version to work with the STM32MP157A chip (since it has an MPU to work with). I am currently working with V1.6.0 on Debian. Currently, I'm trying to organize it a bit so it's a bit more usable but I'm having trouble resizing any of the windows. It doesn't seem to allow me to make changes to, say, the divider between the project explorer and the code window. it just feels like everything is locked into place. If I detach and try and drag it to one side, it doesn't appear to "dock" correctly and, instead, just blocks other windows. Maybe this is just because Linux doesn't work well with the interface and there's nothing that can be done but I wanted to check and see if there's a way to resize windows so it's usable. It's kind of a mess to work with right now. Any help you can give me would be greatly appreciated. Thanks!

I noticed that even if I create a new project using STM32CubeMX IDE for STM32MP157F-EV1 board, in the clock configuration, the MPUSS_CK is 650MHz. In Linux, I can see the CPU frequency is 650MHz only. How can I clock the CPU to 800MHz as supported by the SoC?

I use CubeMx creating stm32mp157 device tree. After the 2nd create , the path "CA7->DeviceTree->[My board]->u-boot" always has a file named "<My board>.dts.bak" . modified the Device Tree code in kernel (USER CODE), then push create. The u-boot dts will be replaced by kernel dts.  

I am running the st-example-image-qt distribution package and am trying to use the M4 processor to feed sensor data to my UI. I can import the OpenAMP_TTY_echo example into stm32cubeide and debug it with my board fine. But now I am trying to make my own project since the OpenAMP example does not have a .ioc configuration file and I would like to set up some timer interrupts and things. Looking in the OpenAMP example, the timer HAL files are not even in there. So I created a new project and selected the STM32MP157c-DK2. It loaded a .ioc configuration file but the project will not build. I don't think there is a build file but I thought that was generated automatically? I can add a debug configuration but there is no .elf to link to. What would be the easiest way to move forward?

Hi everyone,I have a problem using STM32CubeProgrammer (and CLI). They are both showing that my userfs partition have a size of -1162381824 bytes. That partition have size of 2.9GB. After programming with CubeProgrammer I have kernel panic, and I don't know if this is related to CubeProgrammer. I'm trying to program SD card partition by partition using STM32CubeProgrammer but I don't have luck. When I get whole RAW image of SD card and then flash another SD card everything is working. When I get bootfs, userfs, vendorfs and rootfs using dd comand from SD card and then try to program using CubeProgrammer, kernel panic happens. Where I am wrong?Best regards,Nenad

Hi,   I just approach to STM32MP1 and want to port some project from STM32F4/L4 to M4 Core in STM32MP1.   To start, I'm just trying use engineering mode fisrt. I have a STM32MP157C-DK2 board and a new project is generated by STM32CubeMX, all configurations is default and I'm using STM32CubeMP1 v1.3.0.   Unfortunately, I always reach an issue when HAL_RCC_OscConfig always returns HAL_ERROR each time called from SystemClock_Config. Specifically, the following if condition in stm32mp1xx_hal_rcc.c is reached and my program stucks in an infinite loop. if (IS_HSE_IN_USE()) { if ((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState != RCC_HSE_ON)) { return HAL_ERROR; } } Am I missing something or I must write my own HAL_RCC_OscConfig? Again, all configurations is kept as default of STM32MP157C-DK2 board.   Thanks, Bao Son.

I'm updating a .tsv file, used by the CubeProgramer to program a STM32MP DK1. The file I'm looking at contains:#Opt Id Name Type IP Offset Binary - 0x01 fsbl1-boot Binary none 0x0 arm-trusted-firmware/tf-a-stm32mp157a-dk1-serialboot.stm32 - 0x03 ssbl-boot Binary none 0x0 bootloader/u-boot-stm32mp157a-dk1-trusted.stm32 P 0x04 fsbl1 Binary mmc0 0x00004400 arm-trusted-firmware/tf-a-stm32mp157a-dk1-trusted.stm32 P 0x05 fsbl2 Binary mmc0 0x00044400 arm-trusted-firmware/tf-a-stm32mp157a-dk1-trusted.stm32 PD 0x06 ssbl Binary mmc0 0x00084400 bootloader/u-boot-stm32mp157a-dk1-trusted.stm32 P 0x21 boot System mmc0 0x00284400 st-image-bootfs-openstlinux-weston-stm32mp1.ext4 P 0x22 vendorfs FileSystem mmc0 0x04284400 st-image-vendorfs-openstlinux-weston-stm32mp1.ext4 P 0x23 rootfs FileSystem mmc0 0x05284400 st-image-weston-openstlinux-weston-stm32mp1.ext4 P 0x24 userfs FileSystem mmc0 0x33C84400 st-image-userfs-openstlinux-weston-stm32mp1.ext4I'm trying to

I am using STM32CubeIDE v1.4.2 on Ubuntu 18.04.05 with an STM32MP157C-DK2. The board is running the V2 Starter Kit image. If I set the boot switches to 'Reserved' (Boot 0 = 0, Boot2 = 1) I can program the M4 and step through the code. However, if I set the switches to 'Engineering Mode' (Boot0 = 0, Boot2 = 0) as ST suggests I cannot.Does anyone have any idea why I cannot run M4 code in 'Engineering Mode'? The issue seems to be 'external reset detected'. After this message there are timeout messages. This is the console output when I attempt to load and debug M4 code in 'Engineering Mode':Open On-Chip Debugger 0.10.0+dev-g30d1303 (2020-06-18-09:11)Licensed under GNU GPL v2For bug reports, read http://openocd.org/doc/doxygen/bugs.htmlsrst_only srst_pulls_trst srst_gates_jtag srst_open_drain connect_deassert_srst

Hi supporter,I use STM32Cube v1.10 on macos(Mojave) and linux(debian 9). The debug dialog has load mode option to choose production or engineering mode in stm32cubeide on linux system. But that dialog hasn't the load mode on macos.Below picture is debug dialog on macos.Does any thing I am missing to setup for stm32cubeide?

I want to know the role of the m4_***(for example m4_adc, m4_timers1) node in Cortex-A7 Device tree.​When I generate device tree from CubeMX, the m4_*** node are described even if that peripherals are used only on Cortex-M4 FW.​Do I need to set status = "okay" in Cortex-A7 device tree even if ​that peripherals are used only on Cortex-M4 FW?for example, When I use timer6 only on Cortex-M4 FW, Do I need to describe that status = "okay" in m4_timers6 node in device tree?Best regards,H. Masuda

Hi,Im working with STM32MP157A-DK1 board. Im working on the linux side, need to write C/C++ code for saving data into a SD card. I need to use SPI to get data from RF transceiver. I built linux and kernel as in this link:https://wiki.st.com/stm32mpu/wiki/Getting_started/STM32MP1_boards/STM32MP157x-DK2/Develop_on_Arm%C2%AE_Cortex%C2%AE-A7/Modify,_rebuild_and_reload_the_Linux%C2%AE_kernelThen i looked for articles on SPI, these ones especially :

Hi, I have 10 DK2's in a server rack for development and testing. STM32CubeIDE (1.5.0) debugging wants me to specify a serial port and an IP address for debugging. This is IMHO redundant, why? Moreover, the serial ports /dev/ttyACM* are to be selected from a drop-down list. But, those assignments are not persistent. After a reboot of the server or a reconnect of the boards, the ttyACM* changed. I would prefer using the persistent names available at /dev/serial/by-id/usb-STMicroelectronics_STM32_STLink*, but cannot select those in the Debuggger tab.Finally, the IDE asks me for my credentials several times per debug session. Is there a log which I can inspect to see what's going on behind the windows?RegardsKnarfB

I have a custom built buildroot image on my STM32MP157C-DK2. Used STM32CubeIDE 1.5.0 to create a M4 blinky project. Can download and run the .elf manually on the board, LED blinks okay. Engineering Mode works too. In Production Mode, I can download the .elf from IDE. Have to enter my credentials and see the download progress and the resulting .elf on the board.But, after download, I have to enter the same credentials again and .. finally get:Error in final launch sequence:   Failed to execute MI command:   target remote 192.168.2.44:3333   Error message from debugger back end: 192.168.2.44:3333: Connection timed out. Failed to execute MI command: target remote 192.168.2.44:3333   Error message from debugger back end: 192.168.2.44:3333: Connection timed out. 192.168.2.44:3333: Connection timed out.There serial connection says:[ 2174.385112] remoteproc remoteproc0: stopped remote processor m4 [ 2179.484162

Hi, We have a custom board with onboard eMMC which is connected on SDMMC2 lines: SDMMC2_D0 - PB14 SDMMC2_D1 - PB15 SDMMC2_D2 - PB3 SDMMC2_D3 - PB4 SDMMC2_D4 - PB8 SDMMC2_D5 - PB9 SDMMC2_D6 - PC6 SDMMC2_D7 - PC7 SDMMC2_CMD - PG6 SDMMC2_CLK - PE3 These pins are not all default pins for SDMMC2 so I'm interested if there is a way to program this eMMC using DFU mode with Cube Programmer. Is there a way to change pins which are used for programming? Best regards, Nenad

Hi, i just started working/learning STM cards as an intern. I want to run C/C++ codes on STM32MP157A-DK1 ARM Cortex-A7.I did the getting started tutorials at wiki, and im using environmet version 2.1.0 release I followed these posts:https://community.st.com/s/question/0D53W00000M9GphSAF/using-stm32cubeide-for-developing-linux-user-space-applicationshttps://wiki.st.com/stm32mpu/wiki/How_to_manage_OpenSTLinux_project_in_STM32CubeIDEThen I wrote an t

i am not able to flash the image in stm32mp157c-dk2

STM32MP157c-EV1 is connected with two QSPI NOR flash chips.When programming NOR flash using the CubeProgrammer using tsv file, it automatically programs the two NOR flash in Dual-Flash QSPI mode.My requirement is to program just the Single Flash chip connected to BK1.how can I tell the CubeProgrammer to do this?

Hi,Im pretty new here, to be exact it is 2 weeks that i started learning/working with STM32MP157A-DK1, i did all the getting started tutorials on the wiki, now im looking at the CubeIDE, i dont know where to go.Basically i want to learn about writing data into SD card (wthich data comes from ethernet) using DMA but dont know where to start, if there is a place for me that i can find some examples for IDE that could be great. I have average knowledge on c++ i can read every useful piece of code or paper, right now im really lost and dont know what to do.The other topic is can i add aditional libraries in to the IDE and how do i i do that, in C# i can basically do it with nuget packages, but i never used CubeIDE, i also want to learn thatEverything helps,i will be waiting for some guidance.

Hello,I need to flash a custom STM32MP1 board which only has JTAG (no USB port available). Additionally, I build the image using Yocto meaning the output are separate binaries (e.g. U-Boot) and .tsv files.The STM32CubeProgrammer detects the CPU with the ST-LINK/V2 in-circuit debugger. However trying to flash the device comes with the error:```Error: TSV files are not supported with JTAG/SWD debug interface```​Could someone give me more info on how I could flash over JTAG and by using the STM32CubeProgrammer? Or how I could flash in any other way (dont forget that Yocto generates separate binaries and the .tsv files).

Hi,I'm having an issue while trying to debug the OpenAMP_TTY_ECHO_CM4 example described in gettin' started guide for stm32mp157a-DK1 (here link) using Cude IDE 1.4.2 on windows 10 machine. I configure the debug session as describe in the guide section 7, but when I started it, I got the following messages:Open On-Chip Debugger 0.10.0+dev-g30d1303 (2020-06-18-09:13)Licensed under GNU GPL v2For bug reports, read   http://openocd.org/doc/doxygen/bugs.htmlsrst_only srst_pulls_trst srst_gates_jtag srst_open_drain connect_deas

I'm following the tutorials on the wiki about developing for the cortex-m4 on the DK2 kit. I'm facing trouble when I need to connect to the serial console, see image:The chars shown on the error message are random. Things already tried:Update ST-link firmwareSet COM port number to COM1 instead of com24Reconnect ST-linkRe-flash clean starter package on DK2 boardReinstall cubeIDE to a fresh 1.4.0Any idea how to resolve this error? I also got access to MDK-ARM, is there a tutorial or wiki page on how to use the M4 with MDK-ARM?

As long as this 0x23 file is larger than 200M, it will fail to burn. I use version 2.5

I cant seem to get the STM32CubeIDE to work with the STM32MP157C-DK2 board. It builds the examples and then when I go to load and debug i get the following:Open On-Chip Debugger 0.10.0+dev-01193-g5ce997d (2020-02-20-10:57) Licensed under GNU GPL v2 For bug reports, read http://openocd.org/doc/doxygen/bugs.html cortex_a interrupt mask on cortex_a interrupt mask on cortex_a domain access control fixup on cortex_a domain access control fixup on none separate adapter speed: 8000 kHz adapter_nsrst_assert_width: 200 adapter_nsrst_delay: 200 none srst_pulls_trst srst_only srst_pulls_trst srst_gates_jtag srst_open_drain connect_deassert_srst Info : Listening on port 6666 for tcl connections Info : Listening on port 4444 for telnet connections Info : STLINK V2J36S26 (API v2) VID:PID 0483:3752 Info : using stlink api v2 Info : Target voltage: 3.231496 Info : Una

Why does it fail reading the file, which seems to be the biggest one also ?Log:12:20:36 : STM32CubeProgrammer API v2.1.012:20:38 : USB speed : High Speed (480MBit/s)12:20:38 : Manuf. ID : STMicroelectronics12:20:38 : Product ID : DFU in HS Mode @Device ID /0x500, @Revision ID /0x000012:20:38 : SN : 00420020333851053438333012:20:38 : FW version : 0x011012:20:38 : Device ID : 0x050012:20:46 : Read TSV File: C:\stm32mp1-openstlinux-4.19-thud-mp1-19-02-20\images\stm32mp1\flashlayout_st-image-weston\FlashLayout_sdcard_stm32mp157c-dk2-trusted.tsv12:20:46 : Number of partitions: 912:21:08 : Start Embedded Flashing service12:21:08 : Error: The file activePartitions.tsv does not exist, please check the file's path12:21:08 : Error: TSV flashing service failed12:21:14 : Start Embedded Flashing service12:21:14 : Error: The file activePartitions.tsv does not exist, please check the file's pat