STM32CubeIDE (MCUs)

My problem is that when I want to debug my firmware, i get a message saying " 'Launching <MyProgram> Debug' has encountered a problem. Failed to execute MI command : <C://____/MyProgram.binary: No such file or directory."That is true I have not a .binary, but in the properties I checked "Convert to biary file(-O binary)".I'd really appreciate your help.Thank you :)

#define RAM_Image 0x0300xdata u8 DACT_A _at_ RAM_Image+0x0006;xdata u8 DACT_B _at_ RAM_Image+0x0007;DACT_A = 5;DACT_B =6;when DAC_A and DAC_B are global.

I am trying to generate a static library which calls FreeRTOS functions listed below -osThreadDef and osThreadCreateosSignalSet and osSignalWaitosDelayosMutexCreate etc.in System Workbench for STM32.Without including the FreeRTOS Utility in the project, I get errors like,           Type 'osThreadId' could not be resolved           'osPriorityNormal' undeclared (first use in this function)When I choose option to include the FreeRTOS Utility in the project, I get the same errors as above.

Running a very basic C program that prompts user for input from console, grabs input and then does computations and generates output on console.When I run my program as "Local C/C++ application", on console, it appears to be waiting for something such as input without running my code first (my code runs fine on other IDE's and even onlinegdb.com ). I press enter and no response from console. I input something random (garbage input to console) and then the program runs however due to garbage input being in the input stream, the program won't run properly. Not sure what the issue is coming from and/or how to fix it. I have attached the source code ( .C ) as well as two images ( .PNG) of the console before and after I input garbage.

Hello,I noticed that when I want to copy a project into the same workspace, the following issues occur:If the project to copy is the only one into the workspacace, when I paste it, the IDE pops-up a message for a "null argument" error...If there are more projects into the workspace, the IDE let me paste it but the .ioc file name refers to the copied project, not to new pasted one.Yesterday I upgraded to version 1.3.1 build 6291_20200406_0752 (UTC), but I see that these issues are not been corrected.s.

Before upgrading to STM32CubeIDE, in SW4STM32 specifically, I could hover over a variable when the code was paused and see its value. This only works -sometimes- in CubeIDE. I have to click away, double click on another word, tab away and back again, etc (ie, it feels inconsistent) to get it to show me a value on hover. Anyone experience this or have any idea what is going on here?

I'm using STM32CubeIDE 1.3.1, and I'm running into a problem while debugging a STM32L072CB project. Everything is working fine, except that when I click on the I/O Registers tab, I get the following exception:ava.lang.Exception at org.eclipse.ui.internal.ViewReference.createErrorPart(ViewReference.java:114) at org.eclipse.ui.internal.ViewReference.createPart(ViewReference.java:100) at org.eclipse.ui.internal.e4.compatibility.CompatibilityPart.createPart(CompatibilityPart.java:300) at org.eclipse.ui.internal.e4.compatibility.CompatibilityPart.create(CompatibilityPart.java:338) at sun.reflect.GeneratedMethodAccessor35.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:498) at org.eclipse.e4.core.internal.di.MethodRequestor.execute(MethodRequestor.java:58) at org.eclipse.e4.core.internal.di.InjectorImpl.processAnnotated(InjectorImpl.java:998) at org.eclipse.e4.core.internal.di.Injec

..

Hi,I am using STM32G071 Custom board . I have to configure Interrupts as below:1) External Interrupt Highest Priority.2) Comparator Interrupt Second Highest Priority.3) Timer Basic Lowest Priority.or so on..How to I set in below with STM32CubeIDE .EXTI line 2 and line 3 interrupts - Only Used PF2 - EXTI-2- Why also EXTI line 3 is shown ?ADC1, COMP1 and COMP2 interrupts (COMP interrupts through EXTI lines 17 and 18) Only Used COMP1 - Why also ADC1 COMP2 ?TIM6, DAC1 and LPTIM1 interrupts (LPTIM1 interrupt through EXTI line 29) - Why all TIM6, DAC1 and LPTIM1 as shown ?Why combination of peripheral are shown as above ?Do to set them these individually ?Thanks in advance..--Karan

If you delete the project folder from the workspace and then put there a copy previously made from the archive, the Cube will not be able to open it.How can I solve this issue?

Hello,i created my own external loader for STM32F767IGT MCU with W25Q256 QuadSPI FLASH.When i read its memory with STM32CubeIDE i can see all of it and the test works perfectly. But when i read it with STM32 Programmer i see only 99999999 until about 0x90000400.I can write to it but 99999999 still remains.

Upon building with STM32CubeIDE I just get > collect2: error: ld returned 1 exit status> make: *** [makefile:44: help.elf] Error 1Calling arm-none-eabi-gcc directly gets me> arm-none-eabi-gcc: error: nosys.specs: No such file or directoryAny suggestions?

..

Snuippet of source code /* Initialize all configured peripherals */ MX_GPIO_Init(); MX_USART3_UART_Init(); Print("USART init ok\n"); MX_USB_OTG_FS_PCD_Init(); Print("USB pcd init ok\n"); MX_LWIP_Init(); Print("LWIP init ok\n"); /* USER CODE BEGIN 2 --------------------------------------------------------------------------------------------------------------------------------*/ struct tcp_pcb * tcp_client = {0}; tcp_client = tcp_new(); if(tcp_client != 0) {    Print("tcp_new ok\n");    err_t error = {0};    error = tcp_bind(tcp_client, IP_ADDR_ANY);    if(error == ERR_OK)    {       Print("tcp_bind ok\n");       err_t errorConnect = {0};       struct ip4_addr remoteIP;       IP4_ADDR(&am

I want to define array [32] at a specific address. This is what I wrote: #define Step 0x8#define MainAddress 0x801F800#define BiasRefInit *(uint64_t *)(MainAddress+ 0*Step)#define InterREGdelVAL100u *(uint64_t *)(MainAddress+ 1*Step)#define GaveFactor *(uint64_t *)(MainAddress+ 2*Step)#define GaveFactorCount *(uint64_t *)(MainAddress+ 3*Step)#define PowerRecycles *(uint64_t *)(MainAddress+ 4*Step)#define REG_INIT_FIRST *(uint64_t *)(MainAddress+ 5*Step)#define MyArray *(uint64_t (*)[32])(MainAddress+ 5*Step)I cannot access the values ​​in the array but only the whole array. Although the IDE shows me all the (correct) values ​​in the array:snprintf(string, 8, "%06X", MyArray);what should i do?

I have a project with the STM32L053R8.So far, so good, it works. Now I wanted to use __LL_ADC_CALC_TEMPERATURE to get the actual chip temperature - but it is not available in the __LL-list and also not in the include-file.Can you please tell me, how to include it in the project?Thank youAxel

HelloI wrote UART sending command. I use cp210x from Silicon labs. But i didnt see numbers in putty or termite .Please tell me what is wrong ?[url=https://hizliresim.com/dABfK1[/url]My code:My code:#include "string.h"char com_giden[50];int ix = 0; sprintf(com_giden,"merhaba dunya : %d\r\n",ix++);    HAL_UART_Transmit(&huart1,(uint8_t*)com_giden,strlen(com_giden),10);my usb ttl:https://www.gittigidiyor.com/ev-elektronigi/cp2102-usb-to-ttl-com-cevirici-adaptor-5124p-seri-donusturucu-karti-arduino-rs232-convertor_pdp_501510386    HAL_Delay(500);[url=https://hizliresim.com/evmd6T[/url][url=https://hizliresim.com/5q35Sh[/url]

Hi,I try to flash an hoverboard MCU but after the first launch, it is impossible to connect again to the MCU. It is like it was damaged :'(Steps:I put the board under batteryI connect the ST-Link to the 4 pinI connect the ST-Link to the usbI Connect with ST-Link Utility -> It works !I Create an empty project in STM32CubeIDE with the correct .ldI build and run I loose the connection forever, even on the IDE or the UtilityThe MCU is a STM32F103RCT6 the project is configured with stm32f103rctx_flash.ldIt is the second board I fail, I am totally stuck.Thanks for any help

..

Hi all!,I'm triyng to learn about differences between a debug .elf file vs a release .elf.If I upload a debug .elf file and then, in STMStudio I import a variable from that .elf file, STMStudio shows the variable normally, as expected.But, If I upload a release .elf file and then, in STMStudio I import the same variable from the debug .elf file, STMStudio still shows the variable...What I'm missing here?How can STMStudio recover info for a variable in a release uploaded file?

Hi I am using STM32CUBEIDE I can read and write to BKPRAM this all works STM32F407.I have Modified Linker Script to include a BKRAM area 4k, however I have a situation I cannot understand whereby my Build output file .bin changes size dramatically when I locate data in this area. during compilation.My USB Bootloader uses a .bin file so this is a problem due to the massive file, the extra size is basically just padded with zero's when I examine the file.The .hex file increase a small amount.File Size with Structure located in RAMOutput .bin 165,676 bytesOutput.hex 466,084 bytesFile Size with same Structure located in BKPRAM areaOutput .bin 939,624,408 bytes Output.hex 471,755 bytesThe Build analyser show what looks like the correct amount of BKRAM 4K limit used.Any ideas ?Thanks

Hi all,On our card with a STM32L4 we use a siliconLabs BGM13P32 for the BLE.The L4 communicate with the BLE SOC in NCP mode (see here for more details). To do that i have integrated the SiliconLabs libs (BGLIB) to our project on stm32cubeIDE.The project build fine, with no errors/warnings (default options) and i can communicate with the BLE SoC ...only if i use -O0 option in optimization options. If i use for example -Og, the functions used in BGLIB (siliconLabs) is removed from the binary (checked on .map file). The project build without errors but the com with the BLE SoC fails !For information our project is in C++. Join with this post the class of our Bluetooth Com. (bluetoothCom.h/cpp).The whole project is build with -Og optimisation option, just bluetoothCom.cpp use -O0 option to have a correct communication. Do you have an idea how to resolve this ?

Hi,I have stm32f103rb nucleo boardi want to read/write a text file from flash space of the board.Is there any example for implementing this c ode.i am using stm32cube ide.Regards,Manjunath K S

..