Automotive MCUs

When I import example projects for my SPC58 board, I am able to edit the I/O settings. Specifically, I can change the I/O mode of GPIO pins to be input or output instead of both, which I can't do from the Pin Map editor. But when I try and select this component on my own project, the I/O settings are disabled. I can see the configurations I've made in the Pin Map editor, but I can't change anything. Does anyone know how to enable this? I'm using SPC5 Studio 5.8Thanks,

I created a configuration called "Release" and inside it I defined under C/C++ General --> Paths and Symbols a symbol following the advice from several "google" searches but when I try to use it inside a file like:#[if defined(_RELEASE_MODE_)]​ ...some code#endif​ it failed in compilation time as the symbol was not recognized. Any hint?

 I am asking because I created a second configuration (Now I have the " Default" and the "Release"). My goal is to find a way to force the linker to use one .ld file with the " Default" configuration and another .ld file with the "Release" configuration. The final goal is to define different areas in the flash and ram memories for debug use and use with a bootloader.

Hello, During the installation of the environement to run SPC5-MCTK-01, Windows Defender detected a Trojan Horse, "Trojan:Win32/Zpedo.A".What is it about? What do you suggest? Cheers, Christophe

Posted on October 27, 2014 at 12:00Hello!I am looking for the BSDL files for the SPC56 family microcontrollers.Does anyone knows if they are available or the link to download them?Thanks #spc56

I am working on Dual Core SPC58x Series and I face some trouble with Dual core initialization and Usage.For the Moment it will be very much helpful if you can share a document / Application Note / Example on the Initialization and Usage of Dual Core Architecture.

..

Good morningWe connected the board spc570 by microUSB, our operating system (both windows 7 and windows 10) detected it as "SPC570S-DISP discovery board" but can't install any driver. We have already downloaded and installed SPC5 studio with "complete installation" but it seems that it can't be aware of the connected device: we can generate application code and compile a test application but we can't execute and debug it because execute and debug button remains always grayed. So we will ask if we have to buy something else or we have to download some specific driver or change some setting on the PC.best reguard

Hello Community,my application is already running on CORE2, but i want activate the Core0 and let my application  on Core0. Do you have an example how to Setup the Dual core0 and 2?Thank you in advanceTam​

Posted on May 31, 2018 at 09:31 Hello everyone; I am working with SPC570S discovery board. I would like to implement the STOP mode to reduce the power consumption and then wake up by using NMI pin like PA[4] or PC[15]. I already entry the STOP mode however the board does not wake up from STOP mode. The program seems to be halted and then showed a warning like this picture. The mode is then unidentified.

..

 GTM 1.7.0 Released The new main update site http://download.spc5studio.com/updates/ has been updated with GTM 1.7.0.SW Prerequisite : SPC5Studio 5.8.1GTM 1.7.0Improved ATOM, TBU, DPLL and CMU support MCS compiler plugin integrated to easy MCS code compilationUpdated GTM Free Test Application

Through menu "File->New->SPC5 C/C++ Aplication",Create a new project.But,the result is fail.The error message is"An error has occurred. See error log for more details.Argument cannot be null". I think various methods to fix the problem,but not success. Why? Thanks!Use spc5 studio5.8​

I recently downloading the update for runtime IO component on SPC5studio, however, I cannot seem to find a way to add the component to either existing or new project from import wizard from the IDE gui.

SPC5 Studio for SPC560D-DIS board, LINFLEX0 configured as UART, Tx is okay but Rx ISR is not getting called. I am using the auto generated Serial Test application which creates IRQ handlers in "spc5_linflex.c". I have break points set in both Tx and Rx IRQ handlers, only Tx IRQ gets hit. I can see the RX data coming into BDRM buffer and UARTSR DRF (data receive flag) is also set. Please help.

Hello,I've got a problem with max analog channel input voltage. When all supply voltages are 5V everything is fine. But if VDD_HV_IO_MAIN voltage is 3.3V while VDD_HV_ADV is 5V, the analog channel input voltage becomes limited over 4V. This problem is observed both on my PCB and on the EVB (SPC57xxMB + SPC58XXADPT176S REV. B). Can you help me resolve the problem?

Can i enable the FCCU in STOP/Standby mode? If yes let me know what measures must be taken care.

I changed my pc and install SPC5Studio 5.8. After installation i want to create application without RLA platforms. But there are only RLA platforms. How can i fix this problem.Because all project developed without RLA. Also i can not install SPC5 HAL. I need this component also.

Important Upgrade : SPC5Studio 5.8.1 is availableDear All ,SPC5Studio 5.8.1 is availableNew or updated componentsCore 1.2.0Mass Market:SPC5Studio multi update site components management (see above).Flash 1.7.0Selected Customers:Flash driver for SPC58xHxxRLA 1.5.0Mass Market:Pictus review (support for Small and Medium)Add DSPI support for SPC58xNxxAdd Cache Management support for SPC574Kxx, SPC574Sxx, SPC584Bxx, SPC58ECxx, SPC58xGxx, SPC58xHxx, SPC58xExx and SPC58xNxx.SARADC driver enhancement (channel support) for SPC570Sxx, SPC572Lxx, SPC574SxxSelected Customers:Add Wakeup support for SPC58ECxx and SPC58xHxxAdd Cache Management support for SPC584Bxx, SPC58ECxx, SPC58xGxx, SPC58xHxx, SPC58xExx and SPC58xNxx.LinFlex driver enhancement (synchronous/asynch

Posted on July 11, 2018 at 20:07Hello all,I am using SPC570s-Disp eval board and I want to activate the SARADC lld's. I have selected it in the Low Level Drivers Component RLA page, as shown in the screenshot. However, in the MCU wizard tool, it is still shown as inactive (again given in the screenshots). In the code (saradc_lld.h and saradc_lld.c) it seems like the driver enable switches for all the channels (SARADCD12_1, SARADCD12_2 etc.) are undefined. After trying to build, I get the following error messagescomponents/spc570sxx_platform_component_rla/lib/rsc/rules.mk:122: recipe for target 'build/obj/main.o' failedmake: *** [build/obj/main.o] Error 1In file included from ./components/spc570sxx_low_level_drivers_component_rla/cfg/spc5_lld_cfg.h:30:0, from ./components/components.h:32, from ./components/components.c:21:./components/spc570sxx_low_level_drivers_component_rla/lib/includ

Posted on July 11, 2018 at 11:45Hello everyone,I have an SPC57S-Discovery eval board. I am trying to use both SARADC_B and SARADC_0 modules concurrently so that I can sample and eval from two channels at the same time. The code is given in the attached image. I'm trying to enable Ch0 and Ch2 on SARADC_B and Ch1 on SARADC_0. However, when the mcu is executing SAR_ADC_12BIT_0.ICNCMR[0].R =  0x40000000; it raises IVOR1 interrupt and is stuck there. Am I doing something wrong with respect to the ICNCMR register values? Or is it fundamentally not possible to sample and eval from both SARADC modules at the same time?Thanks in advance.#spc570s-adc

Posted on June 30, 2018 at 04:28Hello (I am new to ST and SPC5Studio)I just used the SPC5Studio Application Wizard to import the SPC56ELxx_RLA ADC Test Application for DiscoveryPlus and when I tried to generate it it showed the following error:Error: Cannot load configuration file 'L/SPC56ELxx_RLA ADC Test Application for DiscoveryPlus/configuration.xml':/SPC5-Config/application/instances/instance[7]/pit_settings/channel_0/frequency: Required Field.I tried repeating the process with the SPC56ELxx_RLA CAN Test Application for DiscoveryPlus with similar results. I can see a small 'x' in front of the configuration.xml file in the project explorer in both cases.I really appreciate if someone could help me with this.Thanks!#cannot-load-configuration-file

Posted on June 29, 2018 at 16:10 Title Document: SPC5Studio at EclipseCON 2018EclipseCon France 2018https://www.eclipsecon.org/france2018/session/embedded-automotive-applications-are-just-few-clicks-away Speaker(s): Philippe Noel (STMicroelectronics)STMicroelectronics offers a wide portfolio of microcontrollers (MCUs) for automotive applications, including the 32-bit SPC5 family, built on Power Architecture® technology.SPC5Studio is a free of charge, RCP based integrated development environment provided to our customers to develop their embedded applications. Mainly based on CDT, SPC5Studio uses a large variety of other Eclipse projects (RCPTT, Eclipse Modeling Project, Eclipse Market place client, JBoss Freemarker, E

Posted on June 29, 2018 at 15:41Runtime IO Component is available (1.1.0) Dear All ,Runtime IO Component is available for SPC5Studio 5.8.0.What is Runtime IO Component?The Runtime IO Component allow you to use the standard printf function to write an output message. As first implementation the stdout is redirect, throgh the freopen, to the serial device, in the future (when the support will be added) it can be redirect on CAN or Ethernet device. So to correctly initialize the serial driver, it needs to configure the Runtime IO component selecting the properly device to use, depending which platform we are using.to install this component ,you have to use this update site in Help ==> install new software  http://download.spc5studio.com/updates/  &nb

Posted on June 25, 2018 at 10:11Rt-Thread for XPC56(only support E200Z0) web:     https://github.com/snikeguo/rt-thread/tree/master/libcpu/ppc/E200Z0 If you have any questions, please contact mailto:snikeguo@foxmail.com.thx. #rtos