Automotive MCUs

Hello All,I used the example application of CAN from SPC5 stdio. As mentioned in the application programs LED's are blinking but i was not able to see the msg in Vector CAN case or in the logic analyser. I need to do any extra modification in any file so that i can view the masg sending from the application.

Can someome share some materials about how to use SPCSTUDIO? Thks

Dear All ,SPC5Studio updated components are available (56,57 on 58)more information on http://download.spc5studio.com/you can download SPC5Studio tool in this link :https://www.st.com/en/development-tools/spc5-studio.htmlSPC58xHxx credentials should be requested on credentials@spc5studio.comNew or updated componentsCore 1.5.0   Pinmap wizard multiple boundings management for SPC58xHxx device   Pinmap wizard models for SPC58xHxE7 and SPC58xHxC3 devicesRLA 1.8.0   Standby demo for SPC58ECxx &n

Hi there,I've downloaded the SPC5-CRYP-LIB from the ST website. It says that it should be supported for the whole SPC5xx family, with hardware support only enabled for the SPC560B/C MCU. I am trying to import this plugin for the SPC560B54, but SPCStudio is saying it is incompatible with my project. When I try to import it anyway, it fails to compile. Is there anything I'm doing wrong here?

Dear All ,SPC5Studio updated components are available (56,57 on 58)more information on http://download.spc5studio.com/SPC58xHxx credentials should be requested on credentials@spc5studio.comNew or updated componentsCore 1.5.0   Pinmap wizard multiple boundings management for SPC58xHxx device   Pinmap wizard models for SPC58xHxE7 and SPC58xHxC3 devicesRLA 1.8.0   Standby demo for SPC58ECxx   WKPU low level driver for SPC582Bxx, SPC584Bxx, SPC58xGxx   RTC low level driver for SPC58ECxx   Lin driver for SPC56, SPC57 and SPC58XHXX devices   DMA driver for SPC574Sxx device   DSPI_V2 driver for SPC574Sxx, SPC574Kxx, SPC560BXX,SP

 * Unhandled exceptions handler for core 0.     */    .align   2    .weak    _IVOR0, _IVOR1, _IVOR2, _IVOR3    .weak    _IVOR4, _IVOR5, _IVOR6, _IVOR7    .weak    _IVOR8, _IVOR9, _IVOR10, _IVOR11    .weak    _IVOR12, _IVOR13, _IVOR14, _IVOR15    .weak    _IVOR32, _IVOR33, _IVOR34    .weak    _unhandled_exception0    .type    _unhandled_exception0, @function_IVOR0:_IVOR1:_IVOR2:_IVOR3:_IVOR4:_IVOR5:_IVOR6:_IVOR7:_IVOR8:_IVOR9:_IVOR10:_IVOR11:_IVOR12:

​After Installation of spc5 Studio, i want to download the toolchains. but there is always a Connection error. see below pls: org.eclipse.equinox.p2.transport.ecfWarningWed Mar 13 12:51:45 CET 2019Connection to http://vps182808.ovh.net:8080/marketplace/news/api/p?client=org.eclipse.epp.mpc.core&client.version=1.5.0.v20160608-1457&os=win32&ws=win32&nl=de_DE&java.version=1.8.0_91&product=com.st.tools.spc5.studio.spc5Studio&product.version=5.0.0.201607201759&runtime.version=3.12.0.v201606

..

Posted on February 12, 2016 at 09:33Hi everybody,does anybody know if SPC MCUs libraries are available for Altium Designer?Where could I find them?Thank you,Cel #spc #altium-designer #library

I do not quite understand paragraph 29.3 "Modes of operation" of RM0045 Reference Manual for SPC 56D Line MCUs. It says:Can my firmware change the protection dynamically, i.e. protect resp. unprotect registers?Is there any register that can get the source of reset?                       &nbs

HiI would like to know if there is any IBIS models available for this devices?RegardsLin Biao

Can I reset the device without losing memory contents at the same time? NOTE: This question and answer originated from a customer support case which was handled by us. We regularly review support cases and add any helpful ones here for all to benefit from.

We are using the SPC560B54L3 MCU in our project. After initial testing we found that the startup time is very high (about 235ms from powering the controller to the start of the application main function). From the documentation it is not clear how much time it takes the controller to start typically. Our application is initializing all the SRAM on the target in its startup code. Any advice from your side?NOTE: This question and answer originated from a customer support case which was handled by us. We regularly review support cases and add any helpful ones here for all to benefit from.

Hello. I use spc5studio and SPC582. i want use printf() using the UART for command line test. i alread tested serial. how can i setting  "stdio.h" header at spc5studio . ​please let me know code or seting.

..

Hello,for Maintenance purpose, I made a .c library folder outside of SPC5Studio projectso I just linked the library folder under source folderbut my library didn't compiledHow can i add external library file into project?Thank you

I am using a SPC56XL70.

Posted on November 29, 2017 at 02:34Hi,We have the SPC570S-DISP board which has the SPC570S50E1 MCU. The SPC5Studio Import application Wizard only has SPC570S50L1DISP for the SPC57 S-Line.After import application such as SPC570Sxx_RLA SERIAL Test Application for Discovery, generate and compile it, run the PLS UDE debug, there is nothing printed on the console (the 2nd COM port), and the UDE STK 4.8 gives warning ''Core0::PowerPcInstr PowerPC mode is different between target and pattern, VLE mode is forced''. Question:1. How to get sample code for the SPC570S-DISP with SPC570S50E1 MCU?2. The console issue, was it because the code was generated for SPC570S50L1 MCU so it doesn't work properly on the SPC570S50E1?Thanks for any help.Job

Hello,I have built LED blinky test program in SPC560B-DIS eval, I am setting and clearing LEDs in eval bord. I have introduced delay "osalThreadDelayMilliseconds(500);" between set and clear.I have used below code for my application, but it throws build error please find attached build error. Please guide to fix the error, Note if I am commenting line "stm_lld_start(&STMD1,stm0_config);" starts working. but if including throws build error#include "components.h"#include "stm_lld_cfg.h"int main(void){componentsInit();/* Enable Interrupts */ irqIsrEnable(); /* Activates STM0 Driver */ stm_lld_start(&STMD1,stm0_config); /* Enable channels and start global counter */ stm_lld_enable(&STMD1);for (;;){pal_lld_setpad(PORT_C, PIN_GPIO34_LED)

Posted on February 28, 2017 at 10:36 Title Document: 24 Hours coding 2017 ''ST Amazing Race Car''The annual event took place on 21 and 22 January at the CCI of Le Mans in Sarthe , France. ST Le Mans proposed this year the simulation of a car race. Ghislain Ballester, Michel Wojdaszka, Erwan Yvin and Philippe Noël have designed 10 'intelligent car' models that can react, be remotely controlled and become autonomous, using a microcontroller of the automotive family ADG SPC5 Studio.(SPC56D)3 steps for competitors: garage mode, sensor mode (semi-auto) and automatic control.• Create a remote control, a dashboard either via Android (via bluetooth link) or by serial link on PC which can control the organs of the car in real time (leds and motors)• Interact with external events (night, rain, emergency ...) in semi-automatic mode with sensors (simulated by pushbuttons)• Communicate the p

Hi thereI'm working on a spc5studio project which one of my friends has worked on it. when I open the project in spc5studio, I get the following error message:Error: Unable to find component plugin named 'com.st.tools.spc5.components.platform.spc560bcxx'.Please try to install it from SPC5 market place.Neither can I generate application code nor I can compile my application via SPC5Studio.I couldn't find any plugin called 'com.st.tools.spc5.components.platform.spc560bcxx' in internet. what is the problem?thank you all

How to implement sleep and wakeup mode on SPC560P40?

Hello ,I am not able to build the example program, when compiled following build error recieved "Program "gcc" not found in PATH"Appreciate help

Hi ST experts,I started with SPC560B50L3 and I am using SPC5Studio 5.8. I have problem with eMIOS0 configuration (ch1-ch7) as PWM outputs.. I use PinMap editor and i configured the pins as eMIOS0 output (eMIOS0 ch1-ch7, eMIOS0 ch9-ch13 and eMIOS0 ch20-ch21).I can configure eMIOS0_group0 (ch9-ch15) and eMIOS0_group1 (ch17-ch23) but cannot configure eMIOS0 ch1-ch7 as PWM, why?I saw into RM0017 document on figure 250 channel configuration. How i understand it.. there are 6 PWM output groups.. 3 groups for eMIOS0 and 3 groups for eMIOS1, is not it? For package, which i use, i can used only eMIOS0 (LQFP100) and i need to use all three groups of eMIOS0 for PWM outputs.But via Low Level Driver configuration, i can configure only two groups of eMIOS0 as PWM output.I use SPC560B54L5 and i saw in document RM0037 (figure 357) very similar channel configuration as for SPC560B50L3. I used the MCU with SPC560B-DIS board and there is no problem conf

I have data which i need to store in eeprom,but i am facing following issue:The data once written to one block of flash, not able to overwrite the dataThe other blocks not able to use during run time