STM32CubeIDE (MCUs)

When freeRTOS header cmsis_os.h is used in *.cpp file, it generates compiler warningISO C++ forbids converting a string constant to 'char*'.Proposed fix:Change line 326 of cmsis_os.h from:typedef struct os_thread_def { char                  *name;       ///< Thread nameto:typedef struct os_thread_def {const char            *name;       ///< Thread name

I have searched lots of articles, and followed their approach, but minicom still show garbled. (I tried teraterm on windows before. Its message is correct.)The following is my command lines:---------------------------------------------------------$ sudo minicom -sSerial port setup >  | A -  Serial Device   : /dev/sdc  | B - Lockfile Location   : /var/lock  | C -  Callin Program   :  | D - Callout Program   :  | E -  Bps/Par/Bits    : 115200 8N1  | F - Hardware Flow Control : No  | G - Software Flow Control : No ---------------------------------------------------------I'm pretty sure the config is equal to my USART3 setting:---------------------------------------------------------/* USER CODE END USART3_Init 1 */ huart3.Instance = USART3; huart3.Init.BaudRate = 115200; huart3.Init.W

Hello,I could use DISCO-F413ZH (STM32F413ZH MCU) dev board to test some of the sensors. After successfully testing with dev board, I made custom board using STM32F413RH MCU. When I connect the custom board to computer, it detects as STM32 bootloader. However, when I used STM32Cube IDE, it is not recognizable. I could not program the board. It gives ST-Link error. I have attached the screenshots. Could anyone help me to figure out what I am missing here. what are we missing?, this is one STM32F413RHT6 with no memory attached.Unable to programDo we need some kind of bootloader to be able to experience the same behavior as with an STM development board (to be seen as an external drive)...

I found that Content-assisted shortcuts cannot be modified? Has anyone else had this problem?​

Dear All:I want to use the FPU module in STM32F407,But how can i use it in STM32Cubeide?and i use UCOS_III.If I define a floating point data,when i use this data,it will be case HardFault.add the libopen the FPUdefine __VFP_FP__but in SystemInit FPU Settings cannot be performedbecause in core_cm4.h, __SOFTFP__ is defined ,but i can't find where __SOFTFP__definedand another question,in startup_stm32f407xx.s file, .syntax unified .cpu cortex-m4 .fpu softvfp .thumbi set the Floating-point ABI Hardware ,why .fpu=softvfp?

Does someone could point out where can I find one CubeIDE file full of complex "#define" examples? When I use more sofisticated #define into Cube IDE I receive tons of "error" messages (I mean "error message" not warnings). But into other compilers these #defines shows as perfectly correct. Could one?

I am getting this error it has something to do with FLash memory I guessc:\st\stm32cubeide_1.3.0\stm32cubeide\plugins\com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.win32_1.0.0.201904181610\tools\arm-none-eabi\bin\ld.exe: touch.elf section `ExtFlashSection' will not fit in region `FLASH'c:\st\stm32cubeide_1.3.0\stm32cubeide\plugins\com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.7-2018-q2-update.win32_1.0.0.201904181610\tools\arm-none-eabi\bin\ld.exe: region `FLASH' overflowed by 147584 bytescollect2.exe: error: ld returned 1 exit statusmake: *** [makefile:94: touch.elf] Error 1

Having trouble connecting with this Nucleo on my Windows 10. Using UM1724 User manual document I have looked at jumper connections and driver updates. I've tried using STCubeIDE and the ST-Link Utility SW to upgrade the FW, I also tried ST-link007 and ST-link009 USB Drivers. I also found a section talking about if the Nucleo was plugged in to the computer before the driver was installed, it could lead to the device being "unknown". I'm not sure if I am guilty of this, but I followed their process for recovering if this was the case. It also told me that my "USB Composite Device" is up to date and wouldn't update the driver. Jumpers set to CN2 ON, JP5 power to U5V and IDD ON.Whenever it's plugged in I typically get the slow flashing red LED1 with a solid LED3 (indicating "power-on before USB initialization"). At some point I did get a fast flashing LED1 (indicating  "after the first correct communication between the PC and ST-LINK/V2-1"). Haven't gotten it to repeat that one though

Hi,I am using Stm32CubeIDE v1.3.1 with my custom STM32F746IG board and touchGFX enabled (working properly with 800x480 paralel LCD). I have tried to play with DAC channels (Channel1-2). I can not get it work through the examples with DMA enabled or without DMA enabled. I have tested the Channel1 (PA4) pin by setting as Digital Output to see pin is OK. But when I set this pin as DAC Out mode, the pins behaviour is like floating. I suspect that someting forces the Pin state and the *.ioc file is not enough to configure the DAC. Which registers can be set to force the DAC output manually workout ?(I created a new project for testing, just a LED blinks. Nothing changed, problem is same)

This is the code I am debugging.This is the problem I encounter. The highlighted statement is a printf statement I have used in the HardFault handler

Hi,I have just started with STM32 and got some basic programs running. I wanted to understand stack pointer and program counter.Please help me how do i view Stack pointer in CubeIDE during Debug mode.IDE version 1.3.0

Dear experts,I'm debugging a program on STM32H753 in Atollic TS 9.3 and see something weird.It looks like unreadable hole in D1 RAM from 0x24013880 to 0x24013BAFIs this artifact of the Atollic's debugger, or???The chip runs at 400 MHz

I'm having an issue where STM32CubeIDE is experiencing a Java exception when I attempt to create a STM32 Project. The following is the output from the IDE log !SESSION 2020-07-01 17:40:06.274 ----------------------------------------------- eclipse.buildId=Version 1.3.1 java.version=1.8.0_202 java.vendor=AdoptOpenJdk BootLoader constants: OS=win32, ARCH=x86_64, WS=win32, NL=en_US Command-line arguments: -os win32 -ws win32 -arch x86_64 -data C:\Users\jomodev\STM32CubeIDE\workspace_1mems   !ENTRY com.st.stm32cube.ide.mcu.informationcenter 1 1 2020-07-01 17:40:15.371 !MESSAGE Log4j initialized with config file C:\Users\jomodev\STM32CubeIDE\workspace_1mems\.metadata\.log4j.xml   !ENTRY com.st.stm32cube.ide.mcu.ide 1 1 2020-07-01 17:40:19.969 !MESSAGE Started RMI Server, listening on port 41337   !ENTRY com.st.stm32cube.ide.mcu.ide 4 4 2020-07-01 17:40:20.994 !MESSAGE com.st.stm32cube.ide.mcu.ide/META-INF/version/build_ref file not found, build reference will not be reported

Hi all, I'm trying to simulate a project made in STM32Cube IDE for an STM32F103C6 in proteus ISIS but for debug purposes labcenter's people says that I need the .elf file and the dwarf2 file (both of them in the same folder), then I' found that GCC for STM32Cube IDE generates the dwarf 2 file with the option -gdwarf-2 what I've put in Project Properties -> Build steps and in the pre-build command I've wrote the command -gdwarf-2, it didn't worked so I've changed the command to the post-build commands in the same tab. I've also noted that in Tool Settings are several options for what I think is to choose the type of dwarf file that is going to be made during compilation but the only options are none, minimal (-g1), default (g) and maximum (-g3).After I did this the output of the compilations shows the following message:20:27:10 **** Incremental Build of configuration Debug for project Cubex ****make -j4 all gdwarf-2make (e=3): El sistema no puede encontrar la ruta especificada.m

..

​I can connect with ST_Link Utility but cant connect with CubeIDE ​this is my Debug Setting in CubeIDE ​I keep getting this warning, but I don't know what's wrong.​​What I've tried is changing some debug settings.​I use serial wire (4) MCU setting VCC GND​ SWDIO SWCLK and connect st link2 4 wire

Error: Info : clock speed 1800 kHzError: init mode failed (unable to connect to the target)in procedure 'init' in procedure 'ocd_bouncer'I set high freq clock as ceramic resonator (used 8Mhz clock chipset) and with STLINK V2 debugger. Please let me know the issue i am encountering. Thanks for your time:)

In this image, I have created a new build configuration of Test inside the project & trying to add external library (.a) of CppUTest but not getting add library and library path option. Could you guide me on how to add libraries to any new build configuration created within a project ?Awaiting your early response.ThanksRitu

Not able to flash GPIO_EXTI program on STM32F746ZG board using CubeIDE toolSource code : https://github.com/STMicroelectronics/STM32CubeF7/tree/master/Projects/STM32F746ZG-Nucleo/Examples/GPIO/GPIO_EXTIEnvironment : Ubuntu 18.04.4 LTSCube IDE : STM32CubeIDE Version: 1.3.1 Build: 6291_20200406_0752 (UTC)CubeMX : STM32CubeMX - STM32 Device Configuration Tool Version: 5.6.1-RC1 Build: 20200405-2303 (UTC)ST Link Version : V2J36M26Log Status :/home/default/STM32Cube/Repository/STM32Cube_FW_F7_V1.16.0/Projects/STM32F746ZG-Nucleo/Examples/GPIO/GPIO_EXTI/SW4STM32/STM32746ZG_Nucleo/Debug/st-link_gdbserver_log.txt[0.000] initConfigParams(): Configuration flags start[0.000] initConfigParams():  external-init         false[0.000] initConfigParams():  pend-halt-timeout       (null)[0.000] initConfigParams():  halt            &

Hello,I am trying to step through the How To guide for bringing up a board in the TouchGFX documentation. During "Step 2. CPU Running" I ran into an issue with the step that tests the system timer. I was able to execute the first test regarding the clock configuration, however the breakpoints I have set on the call to HAL_Delay(5000) and the while loop never get reached when I am debugging. I have set up the project for a STM32F469I-Discovery board, with the default pinout configurations, and an advanced application structure. Is there an obvious reason why my breakpoints are not being reached? I noticed that the test of the Clock configuration required a breakpoint before all the function calls to intialize configured peripherals. This breakpoint was reached just fine. The breakpoints required to test the System Timer are after these initialization functions are called. Could there be a problem in one of these Init functions?Thank you for your help.

Hi All!I'm trying to flash my first project to stm32vldiscovery using CubeIDE under Linux (ubuntu 18.04). I tried different debug configuration, but I didn't meet success. I saw different errors such as "Target unknown error 27" or just "Failed to start GDB server".Unfortunately, I couldn't find any appropriate documentation myself.What should I do to flash my board? Could you please clarify what config should I use?Thanks a lot and sorry for this question. I've spent too much time not to ask for help.

Hi all,I am working with FreeRTOS on STM32L476RG and I'm new to this. I am using stm32cubeIDE for project development. I am printing the date and time in the putty and the time format is hours: minutes: seconds: subseconds. When I start running the program the time is correct as with current time. But after some hours it is showing more than 10 minutes delay.I am setting RTC time in binary format and using LSI as clock source. can anyone help me?

..

After I upgrade the CubeIDE to the latest version I'm not able any more to debug a project that before the upgrade was working fine.My current CubeIDE version is Version: 1.3.1 Build: 6291_20200406_0752 (UTC)Muy cube programmer is V2.4.0And the error message I get is:Encountered Error when opening C:\ST\STM32CubeIDE_1.2.0\STM32CubeIDE\plugins\com.st.stm32cube.ide.mcu.externaltools.cubeprogrammer.win32_1.3.0.202002181050\tools\bin\STM32_Programmer_CLI.exe