STM32 MCUs Software development tools

  i am installed cube-MX for linux laptop version (6.17.0) and cube-IDE is (Version: 2.1.1) .For MX it shows option only generlic linux  so it is correct for linux laptop ? and for IDE is debian is fine .&nbsp

When generating a CMake-based STM32 project, STM32CubeMX currently lists every single .c source file manually in CMakeLists.txt. This brings major inconvenience for users:When adding user drivers (e.g., sensor, flash, display, or custom modules), users must manually edit CMakeLists.txt and add each new .c file path.If the user adds many source files, this process is error-prone and inefficient.It does not match modern CMake project practices and reduces project maintainability. Suggestion:Please use file(GLOB_RECURSE ...) to automatically include source files from standard directories such as:Core/Inc/*.hCore/Src/*.c

Hi all,I'm running standalone STM32CubeMX on Debian and I'm having trouble generating a complete project. No matter what I do, code generation only produces three items:- led_test.ioc- Inc/ folder- Src/ folder I'm expecting a full project structure including Core/, Drivers/, startup files, and a .launch file for STM32CubeIDE.Steps I've already tried:1. Selected the NUCLEO-F334R8 from the Board Selector (not the MCU).2. Clicked Yes to initialize all peripherals with default settings.3. In the Project Manager tab, set the Toolchain / IDE to STM32CubeIDE before generating.4. Clicked Generate Code — same incomplete output every time.Has anyone run into this on Debian? Is this a known bug with the standalone CubeMX on Linux, or am I missing a step? Any advice appreciated.ThanksI've attached screenshots of my CubeMX configurations settings below:

The gui seems to not have support for viewing adding or changing watchpoints for what i can find. I am able to use watchpoints using the debug console.">watch address"however it would be nice if that would also be visualized just like breakpoints. STM32CubeIDE for Visual Studio Code: Version 3.9.0 here my launch.json file:{"type": "stlinkgdbtarget","request": "launch","name": "CM7 master STM32Cube: Launch ST-Link GDB Server","origin": "snippet","cwd": "${workspaceFolder}/XXX/","deviceName": "STM3

 Hello everyone,I am learning STM32 embedded development using an STM32 Blue Pill (STM32F103C8T6).I installed STM32CubeIDE, but when I go to File -> New, I only see:STM32CubeIDE Empty ProjectC ProjectC++ ProjectSTM32 CMake ProjectI do not see the normal “STM32 Project” option.Because of this:.ioc file is not being generatedCubeMX integration appears to be missingAdditional details:STM32CubeIDE version: 2.1.1Windows 11STM32 Blue Pill boardST-Link is detected successfully in Device ManagerI already tried:reinstalling packsrefreshing package descriptionsrestarting the IDEreinstalling STM32 packagesBut the issue still exists.Could someone please guide me on:

Product/Tool: STM32CubeProgrammer CLI v2.19.0Target MCU: STM32U385RG-Q (Nucleo-U385RG-Q board)Connection: SWD, mode=UR (Under Reset)TZEN: 0 (non-secure)================================================================================SUMMARY================================================================================We are unable to program a full 16-byte OTP row using STM32_Programmer_CLI.Only the first double-word (8 bytes) of a row can be written. Any attempt toprogram the second double-word of the same row fails silently (word remains0xFFFFFFFF) or is rejected by the flash controller, even though the row shouldnot be locked until both double-words are programmed.Per the reference manual, the OTP lock granularity is one 16-byte row(2 double-words). We expect to be able to program both double-words within arow independently (each in a single operation), provided neither has beenwritten pr

I am currently experiencing the following problem on Windows 11:I have STM32CubeCLT 1.20.0 installed, respective directories are correctly added to the front of system PATH, no problems when (cross)compiling with CMake, Ninja and arm-none-eabi toolchain for an STM32 target.I have to run unit tests on my host machine, for that i use MSYS2 with the UCRT64 environment. To integrate into a common CMake script, i cannot only use the MSYS2 environment from the UCRT64 shell, i therefore added C:\msys64\ucrt64\bin to the back of system PATH.With this constellation, i cannot use the gcc provided by MSYS2 UCRT64. I used this simple setup:main.c#include <stdio.h> int main() { printf("Hello, World!\n"); return 0; } CMakeLists.txtcmake_minimum_required(VERSION 3.10) proje

I am trying to do multidrop with STM32WL5MOC and STM32U031. I have some issues:[1] When WL5MOC is the only active MCU in the circuit (U0 is not powered on) I cannot connect M4 core using TargetSel=0x04970041 option:I can connect to M0+ core using tagetsel (STM32_Programmer_CLI -c port=swd TargetSel=0x04970041 ap=1 mode=hotplug)If I try the same with ap=0, CLI cannot connect to M4 core and retires with ap=1 and then connects M0+ core againThere is no issue when not using targetsel option and U0 is disconnected. I can connect both WL5 cores with ap=0 and ap=1 options.[2] If I power on U0 and try multidrop, I cannot connect any of the cores of WL5:I can connect U0 with targetsel option(STM32_Programmer_CLI -c port=swd TargetSel=0x04590041 ap=0 mode=hotplug).. At first CLI cannot connect with ap=0 and retries with ap=1 and then connects.Interestginly If I try ap=1 directly,

Hi there, im using Nucleo-F446RE , ST HAL and CubeMX, and im learning to configure the clockI use HSE Bypass mode (MCO from the st-link in the nucleo), everything perfect hereIn the RM i found out that, when using HSE BYPASS mode, PH1 (OSC_OU) should be left in HI-Z state What does HI-Z means in STM32 MCUs? does it mean configuring the pin as digital input? or it means configuring the pin as analog input?Or it depends?   When selecting HSE BYPASS MODE the chip image in the .ioc file gets set like thi

With the recent split of STM32CubeIDE and STM32CubeMX, I'd like to propose a dark mode option be added to STM32CubeMX.In consideration of the competing priorities for STM's software development team, I have two suggestions for how this proposal could be implemented:The first suggestion is the typical route: STM's in-house software development team add the UI theming and inputs to switch between dark and light mode.The second suggestion is less typical: make STM32CubeMX open source and let the larger software community assist with adding dark mode. Perhaps the source could be placed alongside other repositories in

I am making use of the SWV to plot a 5Hz Sine Wave.The output on the plotter does not resemble a sine wave:Any recommendations to fix this?

I have created a firmware for a STM32L010F4Px microcontroller.I was able to Connect and Download Firmware by using ST-LINK V2.For some reason, I can't connect to the MCU at the moment by using CubeProgrammer + ST-LINK V2.Instead, I can connect/debug my microcontroller by using a SEGGER J-Link Ultra+ + J-Flash tool.The log from CubeProgrammer doesn't give me much details:13:28:34 : UR connection mode is defined with the HWrst reset mode13:28:34 : ST-LINK SN : 37FF71064E573436D2C1144313:28:34 : ST-LINK FW : V2J47S7

Hello, I'm trying to configure my SAI to receive TDM packets from my external ADC. For some reason, no matter what sample rate I choose, the real audio and error between selected is always 0. I've tried changing the clocks to the SAI1 module to 50 and 100 MHz, but it didn't change anything. Is this a visual bug with CubeMX or is it something with how I'm configuring the peripheral? Thanks.  

Hello,  I tried developing for the NUCLEO-WBA25CE1 using BLE_HeartRate, but even after selecting it, the Next button is disabled. Could you please suggest a good way to develop for this board?  

Hello everyone,I'm using STM32CubeIDE 2.1.0 and STM32CubeProgrammer on Ubuntu 24.04.4 LTS.Yesterday I was able to flash my firmware to an module based on the STM32H755 MCU via ST-LINK using the following settings:Port: SWDMode: NormalReset mode: Software resetEverything worked fine. Today I made some modifications to the firmware, but when I tried to connect again, I got this error:Error: No STM32 target found! If your product embeds Debug Authentication, please perform a discovery using Debug AuthenticationThings I have already tried (none worked):Changing Mode to "Under Re

Hi When I using STM32CubeProgrammer 2.22 GUI and try to control option byte, the page can't display.while CLI can read option bypte. 

missing --start-group around WBA2_LinkLayer_BLE_Full_lib.EnvironmentSTM32CubeMX version: 6.17.0STM32CubeWBA firmware package: 1.9.0Target device: STM32WBA25CG (NUCLEO-48 board)Toolchain: GNU Tools for STM32 14.3.1+st.2 (arm-none-eabi-gcc/ld)Build system: CMake (toolchain selected via "CMake" in CubeMX project settings)Host OS: Windows 11Steps to reproduceCreate a new STM32CubeMX project for STM32WBA25 (NUCLEO board).Enable BLE (peripheral role, BLE_Full stack).In Project Manager → Toolchain/IDE, select CMake.Generate code.Build with the generated CMakeLists (e.g. cube-cmake --build build/Debug).Expected Build links cleanly.Actual Link fails with:ld.exe: stm32wba_ble_stack_full.a(le_ctrl.o): in funct

Hello, I am trying to import the RTSP example for the NUCLEO-N657X0-Q. It is not appearing in the IDE as a choice, but I see the project in D:\STM32\STM32Cube_FW_N6_V1.3.0\Projects\STM32N6570-DK\Applications\VENC\VENC_RTSP_Server 

I am reporting a specific behavior in GDB where the standard hook-stop is completely bypassed if a next (Step Over (F10)) or step (Step Into (F11)) command is interrupted by a software breakpoint instruction (BKPT) embedded within a macro.Environment:Target: STM32L475VGT (ST-Link)GDB Version: GNU gdb (GNU Tools for STM32 14.3.rel1.20251027-0700) 15.2.90.20241229-gitIDE: STM32CubeIDE for VSCode v3.9.0Steps to Reproduce:1. Define a macro in C that includes a software breakpoint instruction:#inclu

STM32CubeMX v6.17.0While configuring an STM32CubeMX project for an STM32H753 Ethernet project on a NUCLEO-H753ZI, I observed some strange behavior.After enabling memory management, including the checkboxes- Apply Application Regions Settings to Peripherals and- Apply Application Regions Settings to Linker Files,I would have expected the memory regions to be included in the linker description file STM32H753XX_FLASH.ld.Unfortunately, this was not the case.However, since the STM32H753XX_FLASH.ld file had obviously been regenerated, I did not suspect the file handling itself.After several hours of searching, I discovered that if the .ld file is deleted before regeneration, different content is generated.Steps to reproduce this:Open STM32CubeMXFile / New Project… / Board SelectorSelect NUCLEO-H753ZIIn „Board Project Options“ dialog, click button „Unselect All“S

Is there anyway to increase the size of the icons in the top menu bar in the IDE?I am 70 now and my eyesight needs a wake-up here :)

Hello, I'm trying to convert a project to vscode the first error I incurred to was this one: I'm trying to convert to cmake using the extension a project for the STM32U585OIYXQ, when I load the source folder and set the output folder then i push on convert and this is the output that I get :   [Error] [ide-project-convert]:Generating project... [Error] [ide-project-convert]:The specified 'STM32U585OIYxQ' device is unknown [Error] [ide-project-convert]: Project conversion failed with exit code: 35. Which has been solved with this work around: "you can enable the stm32cube-ide-project-manager.conversion.ignoreMissingDevice VS Code setting".That went through and I have the following new error: [Info] [project-manager] STM32CubeIDE project manager activation.... [Info] [ide-project-con

I am trying to learn how to program a STM32 micro-controller, specifically a STM32C593. The thing is according to its datasheet it has Ethernet functionality, bit it is missing in the peripheral list inside STM32CUBEMX2 IDE. 

Hi,Im using the IDe but today the software do nothing.I cant compile the project or create a new project or debug and when i want close the program, the cubeide not respond and ill have close using the task manager.Yesterday works fine and i dont make changes on my computer.Any suggestion about what can i do?Thanks! 

It seems like it's been over a year since reports surfaced that the ST-Link interface isn't working on Snapdragons.Are there still no ST-Link interface drivers available for Snapdragon CPUs?