STM32 MCUs Software development tools

Hi, I’m using STM32CubeIDE 1.1.0 (Window) and bluepill STM32F103C8T6 but I met error when debugging:Error in final launch sequence:Failed to execute MI command:target remote localhost:3333Error message from debugger back end:localhost:3333: The system tried to join a drive to a directory on a joined drive.Failed to execute MI command:target remote localhost:3333Error message from debugger back end:localhost:3333: The system tried to join a drive to a directory on a joined drive.localhost:3333: The system tried to join a drive to a directory on a joined drive.Can anyone show me how to configure debug step by step?Thanks!

Hello,I have a general question regarding the linker script generated by STM32CubeIDE.Most of time the STACK and HEAP is placed together into the "same" internal SRAM (see section .user_heap_stack example for demonstration purpose). Note: Yes, there is a chance that region can overlap, but this is something I don't want to discuss here. ._user_heap_stack : {  . = ALIGN(8);  PROVIDE ( end = . );  PROVIDE ( _end = . );  . = . + _Min_Heap_Size;  . = . + _Min_Stack_Size;  . = ALIGN(8); } > RAM_D1I wanted to place some critical data, static variables, etc as well as the STACK pointer into the DTCRAM area. However, the heap is not used so heavily in our application therefore, I would like put it into a slower region e.g. RAM_D2/3. I guess this should be possible , right

In the MX program I set up the rank. to scan 4 values. TemperatureSensor, VRefint, IN0, IN1.I Initially saw this in DMA mode, But see it also happens in Discontinuous Mode. But when read the order is off by 1 position. It looks like it is reading IN1, TemperatureSensor, VRefint, IN0,Here is the relevant code./* MCU Configuration--------------------------------------------------------*/   /* Reset of all peripherals, Initializes the Flash interface and the Systick. */ HAL_Init();   /* USER CODE BEGIN Init */   /* USER CODE END Init */   /* Configure the system clock */ SystemClock_Conf

The clock "to ADC (MHz)" is grey in clock configuration. Don't see prescaler field in configuration. Plus it remove PLL **** configuration in main.c. /* Configure the system clock */ SystemClock_Config();   //****** This below have been remove from my last commit! ********* /* Configure the peripherals common clocks */ PeriphCommonClock_Config(); // ******   //****** And this: /** * @brief Peripherals Common Clock Configuration * @retval None */ void PeriphCommonClock_Config(void) { RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};   /** Initializes the peripherals clock */ PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_ADC; PeriphClkInitStruct.PLL2.PLL2M = 4; PeriphClkInitStruct.PLL2.PLL2N = 9; PeriphClkInitStruct.PLL2.PLL2P = 2; PeriphClkInitStruct.PLL2.PLL2Q = 2; PeriphClkInitStruct.PLL2.PLL2R = 2; PeriphClkInitStruct.PLL2.PLL2RGE = RCC_PLL2VCIRANGE_3; PeriphClkInitStruct.PLL2.PLL2VCOSEL = RCC_PLL2VCOMEDIUM; Periph

Why Stm32CubeIDE can't Config pins in Pinout View ?When I using STM32CUBEMX that's config pins like this [1], but in stm32cubeide dose't like that [2].Pictures:[1][2]

Hello, At code start-up, the function HAL_RCC_OscConfig return error HAL_TIMEOUT. I configured code with STM32CubeIDE. I am attaching clock configuration and code. Error is not repeatable, so it does not happen any time. Does anyone have an idea on how to solve it? Thank you.void SystemClock_Config(void){ RCC_OscInitTypeDef RCC_OscInitStruct = {0}; RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; /** Configure the main internal regulator output voltage */ if (HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1) != HAL_OK) {  Error_Handler(); } /** Con

I have SDMMC1 configured for my H7 as follows: The card is inserted. I call generated init, and set debug to the H

Hello!I'm receving data in UART rx, using DMA and ring buffer with idle detection, but when I disconnect and reconnect the cable in Rx the communication stops and my buffer fills up with '\0'. So, I need to resume the UART communication, how can I do this?I tried to execute the UART init fuctions, but it didn't work. Now I wonder if the cause of this is the no pull-up resistors in Rx. What do you think? I would try this, but CubeMx doesn't let me configure this.

.No jumper wires are involved direct probe connection from signal generator is used(siganls are generating fine cross verified with oscilloscope).Tried checking up with oscilloscope on A0 pin,while giving trigger wave to B5,no changes are seen on A0 pin.Then also isr gettting executed but the vise versa didnt happen.Tried with stm32l152 discovery board the same thing there also the wrong isr are also getting executed.(0th and 5th pin of different ports but).When checked the EXTI->PR REGISTER while in debugging mode ,The bits of 0,1,5 are set when trigger wave given to pin 5.Even though the pin1 nor its interrupts settings are not intialized its also getting set.Spend almost two days till now debugging this issue, any help will be thank full.Till now tried F1 and L1 SERIES both are having issue

This is the log: 16:37:14 : STM32CubeProgrammer API v2.8.0 16:37:32 : ST-LINK SN : 003500125553500D20393256 16:37:32 : ST-LINK FW : V3J8M3 16:37:32 : Board    : STLINK-V3MINI 16:37:32 : Voltage   : 3.00V 16:37:32 : SWD freq  : 24000 KHz 16:37:32 : Connect mode: Normal 16:37:32 : Reset mode : Software reset 16:37:32 : Device ID  : 0x413 16:37:32 : Revision ID : Rev 2.0 16:37:32 : UPLOADING OPTION BYTES DATA ... 16:37:32 :  Bank     : 0x00 16:37:32 :  Address    : 0x40023c14 16:37:32 :  Size     : 4 Bytes 16:37:32 : UPLOADING ... 16:37:32 :  Size     : 1024 Bytes 16:37:32 :&nb

Hi,I have a custom board with STM32f427VG and KSZ8041NL PHY. My ethernet communication is working well in STMCube IDE 1.8.0. But when I try to configure ethernet in ver:1.9.0 I don't see a input box for PHY address. It says it some ethernet settings has been moved to LWIP setting page. How do I set my PHY address which is 1 in STMCube IDE 1.9.0? Is there any more setting to be done compared to 1.8.0 for ethernet communication. Did anyone face this issue? Thanks.

Hello,i can't no longer open my ioc file. In my case its name is MIPControl. My projectname is mipcontrol. I know to change the name of the problem should fix it. But in my .project file the name is already set to MIPControl. When i rightclick on my project and rename it manually to MIPControl i can open the ioc file agin. BUT when i rename it the git repo will be deleted from egit und there is no git repo i can use (i use git in my konsole) Does anyone know where the information is stored that the io file has to be ***.ioc?

I am trying to setup an ADC to read 4 different inputs. TempSensor, VRefint, Channel 0 and Channel 1. When I tell it number of conversions = 4 It lets me Fill in Rank 2, 3, and 4, but not Rank 1. I thought this worked before. I uninstalled the ST IDE, and MX programs and reinstalled. Same issue. What am I doing wrong? Did something get corrupted?  STM32CubeMX - STM32 Device Configuration ToolVersion: 6.5.0-RC4Build: 20220225-1913 (UTC)

Before this all work fine until suddenly the file cannot be open. Tried to uninstall and delete all related file form pc then install back. Tried also to download the new and old version. The result in the same for both, still cannot open file. Can someone help me with this?

I want to download STM32CubeIDE debian version to my laptop. When I click Get Software-->Accept-->Login/Register I get the error " SORRY, PAGE NOT FOUND " . You can see the details at the picture I attached

We rely on QubeMX to generate our boilerplate and initialization code as much as possible. Currently we configure a Software interrupt programatically viaHAL_EXTI_SetConfigLine(...); HAL_NVIC_SetPriority(...); HAL_EXTI_RegisterCallback(...); HAL_NVIC_EnableIRQ(...);And later we invoke the code via HAL_EXTI_GenerateSWI(...);This is finde and it works. However I'm curious if this can be assisted by CubeMX? I see there are EXTI lines available in the NVIC section, but I can't enable them.

Problem with generating initialization code for ETH. After updating my project written in CubeIDE 1.8.0 and CubeH7 1.9.1 do Cube IDE 1.9.0 and CubeH7 1.10.0 Ethernet stopped working. After short investigation I find out that CubeMX does not generated HAL_ETH_MspInit, this is part where GPIO is configured. When I added missing functions from previous version everything start to work. I also tried to generate new project and it still miss HAL_ETH_MspInit.Is it known issue?Edit:It happens also when I use CubeIDE 1.9.0 and CubeH7 1.9.1, so probably its CubeIDE problem.

In our workflow around the code generation and building firmware using STM32CubeIDE, we have certain manual steps after code generation.Is there a place to hook in a script to be run after code generation completes? Similar to the "Build Steps" which can be configured in Eclipse CDT projects?

Hello,Is there a way to create a STM32cube IDE project using command line?Thanks,Mohammed

Hi everyone, I want to organise a little bit more our stm32cube projects. I want to remove Src and Inc folders and create some subfolders. Is it doable without having to use your own Makefile to compile the project ?Thanks in advance for your answer, and sorry if that question has already been answered.Best Regards,Thomas

STM32CubeMX 6.5.0FW_STM32F4_v1.27.0I am using eth chip KSZ8081RNB. I created a BSP component driver for this chip. Is there any way to add this driver to STM32CubeMX so that it appears in the chip selection menu? By the way, in the ethernetif.c file, after generating the code, the USER CODE section is missing in the ethernet_link_check_state() function (so it cannot be used for the user driver)

I have a STM32L431CCT6 uC configured with CubeMX (project attached): RTC connected to LSE 32.768 kHz, auto wake up enabled. In my code, I perform the following calls:HAL_GPIO_WritePin(LED2_RESET_ESP32_GPIO_Port, LED2_RESET_ESP32_Pin, GPIO_PinState::GPIO_PIN_RESET); HAL_PWREx_EnableInternalWakeUpLine(); result = HAL_RTCEx_SetWakeUpTimer(&hrtc, 0x0000FFFF, RTC_WAKEUPCLOCK_RTCCLK_DIV2); if(result == HAL_OK) { HAL_PWR_EnterSTANDBYMode(); }The uC enters correctly the standby mode, it should wake up after 4 seconds, ma it never does. I tried to check if wake up interrupt is launched, removing the HAL_PWR_EnterSTANDBYMode() call, but handler code is never executed (no breakpoint hit, no led blinked).

Hello! I'm using an STM32L4R5ZI board and was running some low power code to put the board in Standby and the board was getting stuck in the clock init section. I would restart the board, it would run HAL_Init (where I assume it would reset the state of the board for reprogramming) and it would appear to still be in low power mode (sitting at around 600 uA when trying to run the clock section rather than the expected 10+ mA) and get stuck (sitting around 2.3 mA). Unplugging the USB and plugging it back in would put it in the same state (stuck at 2.3 mA). I assume it's down to 1 of 3 things:1) There's something wrong with my code and I put it in a weird state it doesn't know how to get out of2) My expectations are wrong and this behaviour could be expected, based on my code3) There's something wrong with my board4) HAL_Init is not performing as expected (though I'm not sure why this would be)I am running STM32CubeIde V1.8.0 and

I`m hoping to have a slave timer enabled but idling and wait to be triggered by a master. The idea is to have the slave to trigger ADC reading for multiple cycles and synchronized with the master:My timer config are shown belowWhen I call functions such as HAL_TIM_OC_Start or anything along the line, the slave timer just starts triggering without waiting for the master to trigger.Would ther

I am using UART with DMA to communicate with nRF52833 with hardware flow control enabled. But while receiveing data, I get continuous interrupts and void USART2_IRQHandler(void) is called continuously.I have enable RXNE interrupt so that I will know when data reception starts. I need this because I maintain state machine in my code and on reception of first byte, I change the state to RX_IN_PROGRESS and then, on RxCpltCallback, I change state to IDLE state.My controller is STM32L031My baudrate is 115200.I am using STM32CubeIDE for my project on ubuntu.I added following code in USART2_IRQHandler() but didnt help.if (__HAL_UART_GET_FLAG(&huart2, UART_FLAG_REACK) == SET) { __HAL_UART_CLEAR_FLAG(&huart2, UART_FLAG_REACK); } if (__HAL_UART_GET_FLAG(&huart2, UART_FLAG_TEACK) == SET) { __HAL_UART_CLEAR_FLAG(&huart2, UART_FLAG_TEACK); } if (__HAL_UART_GET_FLAG(&huart2, UART_FLAG_