STM32CubeIDE (MCUs)

Hi thereI'm a little embarrassed to post this, but..  Coming from Microchip world I would just change TRISx, so simple.As I've learned so far the MX are in charge for setting up a port.But in my application I need to set a 8 bit wide port for parallel interface to a device.Also it needs to change output <> input.My first thoughts were not to tell the MX about the device on port PC0 to PC7.Then do the setup "manually" in the code.But then again I think this so common, there must be a MX way of doing this. Thank you.

Hi,If I use STM32CubeIDE 1.19 to start a new project for the STM32H755 Nucleo board, the startup assembly files in both the CM7 and CM4 sub-projects are the same file with the same contents, startup_stm32h755zitx.s.  It looks like this file is the one generated for the M7 core that just gets copied over to the M4 directory, because inside it has: .cpu cortex-m7Now, I know both cores share all the peripherals and interrupts.  But I would assume the ".cpu" definition would need to be cortex-m4 for the M4 core.  So far I haven't seen any issue, but this is probably a hidden bug.Thanks,-m

Hi, I am creating application using LPBAM configuration. The application simply is:Enter stop mode 2- Use ADC4-12bit channel 22 (PC4) to measure voltage using clock HSI or MISK- ADC wdog to generate interupt when the value reach threshold to exit stop mode 2- LPTIM1 will trigger ADC4 500ms cycle using clock LSE- LPDMA1 channel1 to store converted data, and save to array adc4_buffer[1]- LPDMA1 channel 0 ensure queue run LPBAMWhat I have done:ADC4 configuration (ADC4 global interrupt enable in NVIC)LPTIM1 configuration

Hello, recently I was able to flash a programm on the STM32G474CET3 but I am unable to track Live Variables.I wrote a simple program that just increases a cnt variable each second.My .ioc configuration: Every help is appreciated.

I am using STM32CubeIDE V1.11.0I have exactly the same issue which was described in this post:https://community.st.com/t5/stm32-mcus-boards-and-hardware/st-link-gdb-server-issues/m-p/64010#M623Multiple weeks everything works fine. But suddenly it stops working and i always get this error message when I try to Debug my code in CubeIDE:Failed to bind to port 61235, error code -1: No errorFailure starting SWV server on TCP port: 61235Failed to bind to port 61234, error code -1: No errorFailure starting GDB server: TCP port 61234 not available.Shutting down...Exit. I tried multiple things:Shuting down PC completely (and disconnect from power supply) and booting again multiple times - it didn't change anythingI changed the Port in the Settings to 61238 - same error m

Hello,I'm facing an issue in CubeMX with the AES IV in CTR ModeThe IV is not saved in the IOC file and is discarded from the generated code, replaced with a full 0 value.The AES content inside the IOC file:AES.Algorithm=CRYP_AES_CTRAES.DataType=CRYP_DATATYPE_8BAES.DataWidthUnit=CRYP_DATAWIDTHUNIT_BYTEAES.IPParameters=KeySize,DataType,DataWidthUnit,pKey,AlgorithmAES.KeySize=CRYP_KEYSIZE_256BAES.pKey=-------- -------- -------- -------- -------- -------- -------- --------MCU: STM32F423VHTCubeMX: Latest version 6.16.1AES SettingsAlgorithmData encryption type AES CTRParametersData type 8b(byte swapping)KeySize 256bEncryption/Decryption key -------- -------- -------- -------- -------- -------- -------- --------Initialization vector E467824C 805348FF 4CE1DF70 566ED4A9Data width unit ByteKey and IV configuration skip Always 

 It happens to from time to time that I have a flashed project in a hardware, e.g. a bluepill, but I forgot which source project was belonging to it in the STM32CubeIDE's project treeview.Is there a way to write the name of the project by means of some C-macro in text form into the program as kind of a signature or even more safely, compute a checksum of the flash binary and write that checksum into the program (yes I know, this may become tricky since the checksum alters the checksum itself :)Is there a common technique for this?

I am using STM32F103C8T6 MCU and STM32CubeIDE ver 19.0.0. When i enabled PA8- PWM generation Channel 1 i get warning RCC Mode and Configuration Tab: Master Clock Output as a error/warning. I have reset state the PA8 pin again enabled as TIM1_CH1 and Tim1 setting Channel 1 : PWM generation CH1 again same error/warning i have get. when generated code closly monitored i didnot find and MCO related code in main.c. What to do? should i ignore cubeMX warning/error and relay on generated code? 

I'm using STM32CubeIDE Version 2.0.0 and would like to get the size of all the object files in my build. I know I can do this in Project Settings->C/C++ Build->Settings->Build Steps->Post-build steps->commands using arm-non-eabi-size, but what is the variable that expands to the names of the object files, and how do I use it?

Strange things are happening: I'm running STM32CubeIDE under macOS 15.7.2 (I must admit it is OCLP Sequoia). A couple of minutes ago I was able to open .ioc files in my project - not sure whether that was before the upgrade. Nowthe .ioc are upper strip blue, lower half green. What does that mean? When I invoke the .ioc by double click, it switches over to my Windows VM (Parallels) and fires up CubeMX there (a very old version). When the VM is not running, STM32CubeIDE does nothing. The .ioc is not opened like I was used to before. I'm now updating. I'm puzzled.

None of the beginner's tutorials work anymore because of the removal of STM32cubeMX from the IDE. Please send me a link to one that will work. I have seen some work arounds to solve this but for a beginner they are too complicated.

Today I started STM32CubeIDE again, was notified that an update is due, installed the update (2.0.0). Got an error alert "Computing 'size'", and the Info startup said "URL not found". Anyway, ignored this, started to build my project again. I added ADC1 (before I did the update), but didn't compile that with the old version of Cube. Now the first compile under the new version fails, saying :../Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_hal_adc.h:1981:67: note: expected 'const ADC_HandleTypeDef *' but argument is of type 'ADC_HandleTypeDef' 1981 | uint32_t HAL_ADC_GetValue(const ADC_HandleTypeDef *hadc); | ~~~~~~~~~~~~~~~~~~~~~~~~~^~~~

I'm using STM32CubeIDE 2.0 and CubeMX 6.16.1. When I create a project in CubeMX, it doesn't create the STM32WBA55CGUX_FLASH.ld file. It creates the makefile when I select it in the Toolchain/IDE section, but then gives an error. 

Dear STMicroelectronics Support Team,I am writing to report a persistent issue with STM32CubeIDE that is affecting multiple users in our company and blocking our development work.Issue Description:When we try to debug any STM32 project, the debugger launch process gets stuck at 51% with the message:Launching: Initializing debugger servicesThe issue occurs with different versions of STM32CubeIDE and with multiple target boards.Steps to Reproduce:Open STM32CubeIDE and build the project (build succeeds).Click Debug.Debugger launch stops at 51% and does not pro

Created an account, activated it, signed in, and I'm stuck in a loop of clicking "Get latest" > Accept the license agreement > "Download latest" > Accept the same license agreement > "Download latest" > Accept the same license agreement > and so on. The download never starts. This happens when trying to download CubeMX as well. CubeIDE for vscode worked fine. This seems to be a reoccurring issue over the years. I'm using up to date chrome and have no extensions installed except workplace mandated Microsoft Purview which I cannot disable or interact with.

After installation of STM32CubeIDE in a new computer,  an error reminds when logging: This login session has expired! Please try to login again by going to myST-login,However even I  try to login by going to myST-login, still not succeed. More information for you reference :  computer Operation System is Win11,   IDE Version is 1.16.1I wonder how does this error come and how to deal with it to enable successful loginThank you very much 

Dear STMicroelectronics Team,My name is Yaswanth Kuna from India. I would like to report two issues related to code generation and X-CUBE-AI configuration in the latest versions of STM32CubeIDE, STM32CubeMX, and STM32 expansion packages.I am working with the STM32F407VG MCU and X-CUBE-AI 5.1.2.Issue 1: Missing “x-cube-ai” include folder after code generationEnvironment:STM32CubeMX 1.19.1Steps to reproduce:Create a new STM32 project.Clear all pinouts.Reconfigure all required peripherals manually.Enable X-CUBE-AI and configure it.Generate code.Problem:After code gen

Hello,I tested the new STM32CubeIDE 2.0 today and was initially confused that CubeMX opened when I double-clicked on the *.ioc file. However, this is listed as a new feature in the release notes.Unfortunately, this feature completely destroys my projects.When the code is generated, these settings in the CubeIDE project change:- Targeted Language changes from C++ to C- Linked folders are deleted- Configurations: DEBUG, SYSTEM added- Linker file settings from own configurations deletedDid I make a mistake in the settings? Why is the project changed so much?Best regards,Jens

Background: I have designed a new PCB, which includes a chip similar to one I've used on other PCBs, but with a different part number. The function names for this chip start with the part number.As mentioned, the new project uses a slightly different chip, with a different part number. To not start from scratch, I copied the chip-related files from a different project in the same workspace, and changed the function names. I used Refactor -> Rename to rename the functions, so it would do the source and header files in one go.But renaming didn't stop with the new project. It renamed identical function names in the older projects as well. All files where these functions were mentioned, were updated and saved. So now I have a file restoring task ahead of me. Thank Goodness for a cloud service with a file version history.Question:How do I avoid this in the future? I would very much like to limit renaming to a single project. But th

Hi,still pretty, pretty new to STM32CubeIDE, I'm trying to understand how it works by doing little things. So right now I'm trying to combine both debugger with a terminal both running in STM32CubeIDE.To include terminal in STM32CubeIDE I have followed instruction given here:How to use the STM32CubeIDE terminal to send and receive data (Knowledge Base) So far, running a little test program, I was succesfull doing it at least for very first debug session (i.e. after power cycling the Nucleo-Board). I quit the debug session with the indicated button shown on attached figure below

Hello ST Community team.As a user who visits this Community several times a day, I’ve noticed the mixed feedback regarding the full separation between STM32CubeMX and STM32CubeIDE. Personally, I fully support this decision, and I believe it brings a positive direction for the tools. At the same time, I would like to suggest keeping the CubeMX plug-in available as an optional component in future versions of CubeIDE, so that users who prefer the integrated workflow can still enable it if they wish. This could help accommodate the different preferences within the community. Thank you for your continuous work.Best Regards.II

Hello everyone! My problem is supposed to be a very simple one. I use an interrupt to send messages to my PC, then I send a message back to my STM32. The message is received in good order but I can't print it out. I watched every single YouTube video out there, implemented every single solution (including connecting the SWO to the PB3 pin) - nothing works so far.Can anyone tell me where am I mistaken? My Debug Configuration:Main.c, main.h, and syscalls.c are attached

My laptop died so I scrambled and got another laptop up and running.  I went from the i9 to the i5.  I used to have STM32CubeIDE 1.18 which worked just fine.  I installed it and STM32CubePrg.  It built code just fine. On my "new" laptop I downloaded 2.0 and installed it and STM32CubePrg and STM32CubeMX.  However, now when I try to create a new project I don't see STM32 C/C++ Project.  I see File->New->C/C++ Project or File->New->Project There is no STM32 listed at all.  Did I miss something in the install?  And if I try to build the "hello world" file it asks for "Cross compiler prefix" and "Cross compiler path".  I thought that was supposed to be built into the IDE.  What am I missing? Did I download a brain-dead version of the IDE?  It must be, because every time I try to download a file from ST.com I must "Update profile" and then the download happens.  If I try to download a different version

Hello,I had developed my firmare in STM Cube ide 1.5.1 (stm32h7/)Project repo is here: https://github.com/silelis/MustangRadio_develepementVersion/tree/main/02_Firmware/02_STM32/Radio_mainAnd after I have updated IDE to 2.0.0 I have noticed that STM32h7 falls into hard error interrupt.It also appears when I uninstall IDE and installed pure 2.0.0.When I moved back to 1.5.1 hard errot dissapired. Please check this error in IDE.

Is there an option in the STM32CubeIDE settings to reset to factory settings or something like “Default Settings”?I can’t restore the console window to its original state. When I compile the code, the console window used to appear at the bottom, but now it doesn’t show up anymore.