STM32CubeIDE (MCUs)

I have problems with using Memory Management Tool (MMT) in CubeMX v6.15.0 and CubeIDE is v1.19.0. MCU is STM32H7R3L8H6H.Here's the MMT view and DTCM area of Boot in focus:As you can see, DTCM area is 64 KB. But in CORTEX_M7_BOOT MPU peripheral view it is 128 MB:Same thing

When I install and run CubeIDE 1.1.19, it is blocked by KITE Keeper security and cannot be executed. When I asked the server administrator, they said that orbitum.exe runs and prevents it from launching. Is orbitum.exe included in the IDE package?

Hi,I have latest version of STM32CubeIDE software . After I logged into the tool, it does not show the user name as it was in previous versions. When I try to login using help -> STM32Cube update -> connect to myST, it says, it will  display message "Clear myST account information for this session" if I have already logged in, else it ask for use id and password. I tried with wrong password to see if it checks, I get a failure notice. If I use the correct password, the login window disappears, signalling that my login is correctIDE version 1.19.0

Hi,I have used CubeIDE for 2 years, recently the Project Explorer view disappears occasionally, and I found ctrl-m can recover it, but now it's gone completely, ctrl-m doesn't work, Window->Show View->Project Explorer doesn't work neither.Anybody knows how to recover it?Chao

Just download the latest version from ST web and installed Linux version of the STM32IDE tools chain. It is Debian Linux 12, updated and upgraded. No hardware display card. Use the Intel i5 COP internal display card. Display is small on 4k screen. If I switched to 2k resolution, display size is normal. An idea on setting the software to expect a 4k screen?  Many thanks

Hello, I have recently upgradated STM32CubeIDE from v.1.13.2 to v.1.14.0.The upgrade seems has gone well, as indicated in the Help->About window:Anyway, if i check the window installed application list, is still indicated the previous version:Also, in the fi

Hi,We are developing a desktop application on Python using Qt's PySide6 library and one of our goals is to build a STM32CubeIDE project from this application. I have read that we can achieve this via command line. I can successfully run command line prompts from Python but what I wanted to ask is that should we use `stm32cubeide` from command line, which makes STM32CubeIDE is a dependency for our project, or should we use another compiler like `gcc` or `eclipse` headless builds? These options could achieve what we are trying to do but I wanted to take your opinions on this matter.Here are some of the examples I found so far in ST Community Forum and in web:In this link for Eclipse headless builds we can achieve the build with something like:$ eclipse \ --launcher.suppressError

Installing EGit for Eclipse 6.7.0 in STM32CubeIDE 1.19.0 stops the display of Help Topic contents.I have a clean install of CubeIDE.Opening menu item: Help -> Help Contents opens the Help window OKOpening menu item: Help -> Show Context Help Contents opens Help window OK and Topic content can be selected and viewed.After installing EGit the Help window no longer shows at all and selecting any topic in the Help pane is an empty page. The Git functionality seems to work, staging, commit and compare to a local Git repository, I have not tried with GitHub at this time.There was a warning during EGit installation:

Hello everyone,I tried to create an STM project using existing .ioc files from my friend. They suggested choosing the Migrate option, but unfortunately, it didn’t work for me. For context:I’m using Windows.The same migration process works perfectly on Mac.When I open the main code, I only see the basic template code that appears when starting a new project—all the code from my friend has disappeared.I’ve already tried reinstalling the STM software, but that didn’t help either.Has anyone encountered this issue or can suggest a workaround?Thanks in advance for your help! 

My application use lots of RAM, I'm concern about the stack memory. The RAM size is  128KB,from 0x20000000 to 0x20020000. Form the linker script (.ld) file, _Min_Heap_Size = 0x200; /* required amount of heap */ _Min_Stack_Size = 0x400; /* required amount of stack */ Use "Build Analyzer" to check Memory Details, it says "._user_heap_stack  Run Address  0x2000d160     1.5K ". But when I run the debugger, SP starting at 0x20020000; when call functions it goes to 0x2001ffe8; 0x2001ffe0... My question are: 1. The ._user_heap_stack  Run Address should be 0x2001FA00  (size 0x400 + 0x200 ==>0x600), end at 0x20020000.  2. During debugging, I can use SP to view the stack pointer address. How can I view Heap address? 3. Stack area should be from  0x2001FC01 to 0x20020000; and heap area is from&

how to setup manually freertos without errors ?

Fresh install of stm32cube1.9.0 (onto a Windows 10 64-bit system). This older-than-current version needs to be used (at least at first) to avoid issues in resurrecting an old project (from when1.9.0 was current).The default install path (from the application's installer) was overridden (to C:\ST\STM32CubeIDE_1.9.0\).I believe I am having a problem with the internal (to STM32CUBEIDE) value assigned to it's PATH variable (see below), however, I do not know how to update this internal PATH value to help the IDE find make.exe (which was installed in the system during the installation of the IDE overall.)A small (C-language) test program was created and an attempt made to build it, resulting in the following error:-----------------------------------------------------------------------------------------12:06:22 **** Build of configuration Debug for project test1 ****make allCannot run program "make": Launching failed Error:

I have TrueStudio and STM32CubeIDE 1.17.0 installed in OS Win10, it works fine for my current project.But our cooperation will update the OS to Win11. The TrueStudio and STM32CubeIDE 1.17.0 will automatically work for Win 11 OS? or should I reinstall it?

i am trying to install cube-ide on my RHEL (Red Hat Enterprise Linux) ,whenever i try to install that i found that a folder is creating and once i go through the instructions and accepting licenses the folder is automatically deleting and causing an error like no matches found Can anyone tell me how to resolve this issue

Hello,I am working with the STM32N6570-DK board and using STM32CubeIDE (version 1.19.0) .I cloned the full STM32N6 repository from:  https://github.com/STMicroelectronics/STM32CubeN6 When I try to build and flash the Ux_Device_Video project, I face a problem: I right-click on the Ux_Device_Video→ Debug As → it flashes successfully, but the program never reaches  main(). (Normally in every program the debugger points to first line in main).When I press Run, the debugger only executes a few assembly lines like below and stays there:

Morning all,I'm really having some issues getting the latest CubeIDE (1.18.1) to work.This problem started when I was trying out some different processors for a new product (a CPU upgrade) - everytime I selected the new CPU and attempted to start a new project, I was told that it was missing an XML file and that no new project could be started without it.After trying/retrying several times with searches for the XML file turning up nothing - I came to the conclusion that I needed a re-install of the tools as this would give me the XML file I needed for the new board.I downloaded and installed the latest 1.18.1. Everytime I started CubeIDE, I would get a popup window after the splash screen  saying this or that log would hold the details of what was going wrong. Reading the log file showed that there was no swt-win32 in the java library path. The path listed in the log is pointing to a .DLL, which exists at the location given.Assuming I had an o

STM32CubeIDE 1.9.0 has been working fine, until tonite. I started it and after it asked which workspace it acted like it was loading but never went anywhere. I killed it, removed the .lock file and restarted and the same thing except it's now exiting. The .ide.log has this:2022-06-15 23:57:26,297 [INFO] PluginManager:213 - loadIPPluginJar : add gic 2022-06-15 23:57:26,301 [INFO] IPUIPlugin:75 - create IPUIPlugin 2022-06-15 23:57:26,301 [INFO] PluginManager:213 - loadIPPluginJar : add openamp 2022-06-15 23:57:26,624 [FATAL] Updater:297 - Updater called before beeing initialized 2022-06-15 23:57:26,784 [FATAL] Updater:297 - Updater called before beeing initialized 2022-06-15 23:57:26,795 [INFO] DbMcusAds:47 - JSON generation date=Thu Sep 30 02:55:09 EDT 2021 (1632984909247) 2022-06-15 23:57:26,795 [FATAL] Updater:297 - Updater called before beeing initialized... and it just keeps going. I tried re-installing but it just sa

Good evening,I’m reaching out to ask if anyone might be familiar with a solution to a hard fault issue we’re currently encountering.Here is the situation:We are using a custom-designed board that incorporates an STM32H7 microcontroller and external Flash memory from Winbond. All source code is stored in the external Flash. The code itself is relatively simple and primarily handles UART communication.While debugging with CubeIDE, we frequently encounter hard faults when using the Live Expression feature. The fault appears to be an alignment error.The debugger connection is via SWD using ST-Link. Interestingly, when debugging via JTAG using SEGGER’s J-Link, the hard fault does not occur—even when using Live Expression. However, in this case, the console displays a message saying “cannot read register map.”This leads me to believe that the occurrence of hard faults may be influenced by the debugging interface (SWD vs. JTAG).I would great

Bug Report: CubeMX Code Generation Error - Incorrect DMA Link in HAL_XSPI_MspInit Function Environment The software environment is STM32CubeIDEVersion: 1.19.0 Build: 25607_20250703_0907 (UTC)and the FW used is STM32CubeH7RS Firmware Package V1.2.0 / 05-February-2025. Problem Description When CubeMX generates theHAL_XSPI_MspInitfunction, it incorrectly linkshandle_HPDMA1_Channel0, which is the transmit (TX) DMA channel, to the receive (RX) pointerhdmarxof the XSPI handle. This causes manually modified code to be overwritten with the incorrect code every time the.ioc

I'm trying to get semihosting to work under STM32CubeIDE with ST-LINK(OpenOCD) debugging.After being able to connect to the target (an STM32H503), I cannot step over the function initialise_monitor_handles()  (see source code). A lot of traps occur but I can't get into the real code to debug. (the lines in the main.c while loop).Bear with me but the code looks a bit like swiss cheese. Tried various reads, scanf etc. But at the moment I cannot get across the "initialise_monitor_handles();" call.

I'm using STM32f407 board with Cubeide. When load new code, I want to work code after pressing reset button.How can I set it in STM32CubeIde.Thank's

I got this (since I have multiple STLINKs attached):Where do I specify the serial number in the command line (of the gdb server) ?

I am writing some firmware for a device with an alpha-numeric display. The display language must be changable. For most languages, this means using characters outside the A-Z range. UTF-8 covers most of the necessary characters.In the project properties, I found this setting, and naively thought that the UTF-8 selection included the actual compiler:Well, obviously not, as it is GCC that needs to know that the character set is to be UTF-8. The codesprintf(pString, "Français");is translated tosprintf(pString, "F

I'm using the STM32G474RE with STM32CubeIDE - Version: 1.19.0, and I encountered a strange issue. I'm not sure whether to call it an error, as it doesn't technically throw any errors—but it's unusual.When I create a new project and open the .ioc configuration, the NVIC section (which usually shows 7-8 entries for code generation) is completely empty. This behavior seems abnormal, and I'm unsure what's causing it.Could someone please help me understand what's going on or how to resolve this?

I'm trying out semihosting with openocd in STM32CubeIDE.  For this purpose I added the call initialise_monitor_handles(); in main.c as the second call after HAL_Init(); I have STLINK(gdb server) configured. The program goes into that call (initialise_monitor_handles) but never returns. Trying OpenOCD gives another error:Open On-Chip Debugger 0.12.0+dev-00623-g0ba753ca7 (2025-04-30-14:20) [https://github.com/STMicroelectronics/OpenOCD] Licensed under G